Base: Steel sheet metal DIN 1623, type 12.03
Threaded stud: Steel, zinc plated and blue passivated finish
Hex nut: Steel, ISO 4032
Hex nut is standard part of assembly
Black rubber pad inlay: Nitrile Butadiene rubber, 85-90° Shore A hardness
White rubber pad inlay: Santoprene® (TPE), 85-90° Shore A hardness
Stainless steel assembly screw for rubber pad is loctited into stud
|| The solid rubber pad is firmly
embedded in the sheet metal base and secured by a screw loctited
The threaded stud can be either adjusted via the internal hexagon
at the top or the wrench flats at the lower end.
To insure proper leveling mount size, divide the machine weight
by the number of mounts required. This will equal the pounds
or load per mount.
The static load is limited by any deformation of the base.
Black pad inlay (NBR) offers high resistance to swelling when in contact with oils and fuels.
White pad inlay (TPE) has excellent dynamic fatigue life and is resistant to ozone and atmospheric influences.
Polished finish version available upon request.
Version without pad available upon request.