NO. 6312 V Crocodile Clamps Steel, with Adjustable Holder

Photo

NO. 6312 V Steel, Crocodile Clamps, with Adjustable Holder

Standard Sheet NO. 6312 V Print This Page

Product description

Information

Crocodile clamps No. 6312 V are infinitely adjustable, easily expanded for every clamping height. They are used for a variety of clamping applications including those using T-grooves and threaded holes. Compression piece and adjustable holders are connected permanently to the clamp body, so the crocodile clamp can be used quickly.

The clamp body is equipped with two varied clamping surfaces and can be easily turned to use one side or the other. Due to the fully assembled construction, this makes for easy set-up and handling on equipment. Crocodile clamps are especially suitable for use on injection molding machines and various presses.

Advantages:

Variable and fast adjustment option at a distance from the workpiece
Use in all areas involving cutting and non-cutting processes
Especially well-suited for use on injection moulding machines and presses
No additional supports needed to achieve the required clamping height
Adjustable holder pieces are connected permanently to the clamping jaw
The crocodile clamp can be extended easily for every clamping height.

Specification

Clamp body, compression pieces and adjustable holders
Tempered steel
Galvanized finish

RoHS

Accessory

T-Slot Bolts DIN 787
Fixture Nuts DIN 6330
Heavy Duty Washers DIN 6340
T-Slot Nuts DIN 508
Double Ended Threaded Studs DIN 6379

Technical drawing

NO. 6312 V Steel, Crocodile Clamps, with Adjustable Holder sketch

Hide technical drawing

Part Options / Table

Part Number	d₁ Bore	b₁	l₁	Slot size Adjustable	h₁	h₂	h₃	h₄	h₅	b₂	l₂	l₃	l₄	Max. clamping force F*

A79756	B 13	1.73	4.53	10,12,14	1.06	0.67	0.47	0-55	0.71	1.18	0.43	0.98	1.18	6744 lbf (30 kN)
A79798	B 17	2.17	5.91	12,14,16,18	1.42	0.83	0.67	0-70	0.79	1.61	0.47	1.38	1.42	8992 lbf (40 kN)
A79855	B 21	2.44	7.36	16,18,20,22	1.65	1.06	0.79	0-80	1.18	1.18	0.55	1.73	1.73	13489 lbf (60 kN)
A79913	B 25	2.76	9.25	20,22,24,28	2.01	1.34	0.94	0-100	1.22	1.18	0.67	2.36	2.36	16861 lbf (75 kN)
A376475	B 25	0.91	11.22	20,22,24,28	2.20	1.38	0.94	0-100	1.38	1.18	0.67	2.44	2.44	16861 lbf (75 kN)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Bore	b₁	l₁	Slot size Adjustable	h₁	h₂	h₃	h₄	h₅	b₂	l₂	l₃	l₄	Max. clamping force F*

B 13	1.73	4.53	10,12,14	1.06	0.67	0.47	0-55	0.71	1.18	0.43	0.98	1.18	6744 lbf (30 kN)
B 17	2.17	5.91	12,14,16,18	1.42	0.83	0.67	0-70	0.79	1.61	0.47	1.38	1.42	8992 lbf (40 kN)
B 21	2.44	7.36	16,18,20,22	1.65	1.06	0.79	0-80	1.18	1.18	0.55	1.73	1.73	13489 lbf (60 kN)
B 25	2.76	9.25	20,22,24,28	2.01	1.34	0.94	0-100	1.22	1.18	0.67	2.36	2.36	16861 lbf (75 kN)
B 25	0.91	11.22	20,22,24,28	2.20	1.38	0.94	0-100	1.38	1.18	0.67	2.44	2.44	16861 lbf (75 kN)

*Specified clamping forces in optimal clamping position (smallest distance from the clamping screw to the clamping point). Clamping forces can vary depending on clamping, strength class of the clamping screw, and the condition of the thread (lubrication).