The clamping principle of GN 860 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN 810 vertical acting toggle clamps.
To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar.
Pneumatic toggle clamps in the U-bar version with two flanged washers (Type AP3) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CP3.
Type EP3 version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 clamp mounts to hold the workpiece in place.
These toggle clamps are also available in sizes 200 and up as a version M (magnetic piston). In conjunction with GN 896.1 / GN 896.2 proximity switches, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal.
Specification
Parts in sheet metal
Case-hardened steel C10,
Zinc plated, blue passivated finish
Hardened bearing pins
Case-hardened bearing rivets
(for size 200 and up)
Air cylinder bearing pins case- hardened
Double-action air cylinder
Max. operating pressure 6 bar
All moving parts lubricated with special grease
Spindle assembly GN 708.1,
Type A
Steel, zinc plated, blue passivated finish
Rubber tip 85 shore A
RoHS compliant
Accessory
Spindle assemblies
GN 801 clamp mounts (for Type AP3)
GN 809 clamp mounts (for Type EP3)
GN 896.1 / GN 896.2 proximity switches
Technical drawing
Hide technical drawing
Part Options / Table
Type
AP3
U-bar version, with two flanged washers
CP3
U-bar version, with two flanged washers and GN 708.1 spindle assembly
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.
Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.
Note about forwarding
For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.
You will not be redirected automatically. Please click on the link below.