GN 831 toggle latches are used for the secure holding of flaps, container lids, etc. They lock securely over the center and are thus vibration proof. A versatile, low profile design.
The stroke w1 of the latch hook can pull the parts to be clamped together by up to 5 mm. The range w2 can be adjusted on the M 5 threaded spindle of the latch hook.
The load specified in the table is simply a guideline value for the nominal static pulling force the latch can withstand. The holding capacity can be adversely affected by the conditions under which the latch is used, such as vibration or shock loads.
Long version: Toggle latch mounting plate holes exposed when latch is in closed position.
Short version: Toggle latch mounting plate is flipped 180° and mounting holes are hidden under latch in closed position.
The catch bracket is part of the latch assembly.
Toggle latch SteelST
zinc plated, blue passivated finish Stainless steelNI
European Standard No. 1.4301, AISI 304
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Keep informed about our products, new product launches, and more through the JW Winco e-Newsletter.
JW Winco, Inc.
JW Winco is a manufacturer / distributor of standard parts. Winco was established in May of 1978 and our North American headquarters is located in New Berlin, Wisconsin, USA with sales locations in Canada (J.W. Winco Canada, Inc.) and Mexico.