Indexing Plungers EN 617.2

EN 617.2 Plastic Indexing Plungers, with Steel Plunger Pin, Lock-Out and Non Lock-Out, with Red Knob Type: B - Non lock-out, without lock nut
Material: ST - Steel

ELESA original design

code: PMT.100

Type: B - Non lock-out, without lock nut
Material: ST - Steel

Standard Sheet EN 617.2 Print This Page List of Indexing Plunger Types Plastic Characteristics Metric ISO Fine Threads DIN 13

Product description

Indexing plungers EN 617.2 with plastic body are a reasonably priced indexing plunger variation. The dimensions correspond to those of indexing plungers GN 617 or GN 617.1.

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Specification

Threaded body
Plastic
Technopolymer (Polyamide PA-HP)

Glass fiber reinforced
Temperature resistant up to 266 °F (130 °C)
Black, matte finish

Plunger pin
SteelST

Hardened
Blackened finish

Spring
Stainless steel AISI 302

Knob
Plastic
Technopolymer (Polyamide PA)

Temperature resistant up to 266 °F (130 °C)
Red, RAL 3000, matte finishRT
Not removable

Lock nut
Plastic
Technopolymer (Polyamide PA-HP)
Black, matte finish

RoHS

EN 617.2 Plastic Indexing Plungers, with Steel Plunger Pin, Lock-Out and Non Lock-Out, with Red Knob sketch

Hide technical drawing

Part Options / Table

Type

B	Non lock-out, without lock nut
BK	Non lock-out, with lock nut
C	Lock-out, without lock nut
CK	Lock-out, with lock nut

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-B-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-B-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-B-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-B-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-B-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-B-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-B-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-BK-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-BK-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-BK-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-BK-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-BK-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-BK-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-BK-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-C-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-C-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-C-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-C-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-C-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-C-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-C-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-CK-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-CK-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-CK-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-CK-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-CK-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-CK-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-CK-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
0.394	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)