GN 115.8 cam locks with hook and latch bracket are mainly used for sliding doors and flaps. The latching action is in a radial direction to the axis of rotation, resulting in a wide variety of different uses.
The latches are delivered with 2 keys and loosely enclosed hook. The key can be removed in both end positions.
Types with a standard lock allow every lock to be opened with the same key. For the types with different lock, there are more than 200 different lock variants, whose keys are marked by numbers.
Cam lock housing
Zinc die-cast
Housing collar
finish
Hook / assembly hardware
Steel, zinc plated, blue passivated finish
Key
Nickel silver with plastic hand piece
Wing knob / T-handle
Plastic
Technopolymer (Polyamide PA)
Black, matte finish
Protection class IP65
RoHS
Cam locks with other hook distance A
Hook with other pivoting radius R
| SC | With key (Keyed alike) |
| SU | With key (Keyed differently) |
| SCK | With wing knob (Keyed alike) |
| SUK | With wing knob (Keyed differently) |
| SCT | With T-handle (Keyed alike) |
| SUT | With T-handle (Keyed differently) |
| H1 | Pivoting radius R = 28 |
| 1 | Without latch bracket |
| 2 | With latch bracket |
| Hook distance A | d Type SC, SU | Type SCK, SUK, SCT, SUT | h Type SC, SU | Type SCK, SUK, SCT, SUT |
|---|---|---|---|---|
| 0.71 | 1.10 | 1.26 | 0.16 | 0.24 |
|
For installation of the cam latch, create a bore in the door, cover or hatch as shown in the outline drawing. The installation bore in the door leaf is usually generated by punching or laser machining during a mass production run. The installation bore can also be created by drilling or milling as shown in the outline drawings. For small production runs and steel sheets below 2 mm thickness, Sheet Metal Punches GN 123 are the tool of choice. The hook can only be attached to the latch after installing the lock housing in the door leaf. The bolt diameter may be shifted by ± 5 mm, making it easier to adapt the latching mechanism to the installation site. When latched, the bolt is ideally positioned at the level of the axis of rotation as shown. A sideways offset of as much as 4 mm does not impair the proper function. The angle of rotation of the hook is normally limited to 90°. Depending on the mounting of the contact pin which is supplied unassembled, the latching action is effected by turning left or right. Without the contact pin, the hook can be rotated by 360°. |
||||||||||
|
|||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 99 | $33.18 |
| 100 | 249 | $30.42 |
| 250 | 499 | $27.65 |
| ≥ 500 | $24.89 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
Attention Valued Customer,
Beginning June 15, 2024, we will implement a price adjustment. Some items will have a price decrease, while others will increase. The adjustment helps ensure our commitment to providing our customers with the best products and services.
We will honor current published prices through June 14, 2024.
Customers with pricing agreements will not be effected until annual pricing is reviewed.
Thank you
J.W. Winco
