GN 139.1 Hinges with Electrical Switching Function Zinc Die-Cast, with Safety Switch, with Connector Cable

Photo

GN 139.1 Zinc Die-Cast Hinges with Electrical Switching Function, with Safety Switch, with Connector Cable Type: AK - Cable at the top
Type: AK - Cable at the top
GN 139.1 Zinc Die-Cast Hinges with Electrical Switching Function, with Safety Switch, with Connector Cable Type: AK - Cable at the top GN 139.1 Zinc Die-Cast Hinges with Electrical Switching Function, with Safety Switch, with Connector Cable Type: BK - Cable from the bottom GN 139.1 Zinc Die-Cast Hinges with Electrical Switching Function, with Safety Switch, with Connector Cable Type: CK - Cable from the backside

Product description

Information

GN 139.1 Hinges with Integrated Safety Switches have been designed for use on monitoring doors and covers of machines and equipment. Opening the door activates the switch contacts. This causes an interruption in a protective circuit via broken contact (NC) and at the same time signals the door opening by closing a normally open contact element (NO).

The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached is adjustable (see diagram under "Contact termination." Together with the integrated contact blocks, the hinges are a compact, easy-to-mount unit with an attractive design. The mounting from the back makes the hinge particularly tamper-proof.

For version without safety switch, see GN 139.2.


Specification

Hinge body
Zinc die-cast, silver metallic powder coated finish

Hinge pin
Stainless steel, European standard 1.4305 (American Standard 303 series)

Available with narrow hinge wing (left in photo) or broad hinge wing (right in photo)




RoHS compliant

Accessory

Flat mounting plates, see GN 139.3

Angled mounting plates, see GN 139.4

On request

Hinges with operating angle > 0°

Hinges with other contact load ratings

Technical drawing

3D
Hide technical drawing
GN 139.1 Zinc Die-Cast Hinges with Electrical Switching Function, with Safety Switch, with Connector Cable sketch

Part Options / Table

Type

AKCable at the top
BKCable from the bottom
CKCable from the backside
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
l1
hinge
width
l2l3l4l5
hinge
wing
l6
Cable length
in meters
h1h2m1m2m3
1.933.981.183.190.590.080.200.470.892.800.671.06
3.113.981.183.191.180.080.200.470.892.800.671.97

Build & Price

Width l1
Length l2
Type



Cable length l6

Mechanical features

Maximal load


Information with safety factor

Examples of calculation



Load
direction

→ see https://www.ganter-griff.de/de/service/downloads/betriebsanleitungen

l1= 49

1500 N

1000 N

1000 N

l1= 79

750 N

500 N

500 N

Fixing

from the back, 7 x threads M5, 6 mm deep

Recommended torque

5 Nm (Screws M5)

Protection class

IP67 / IP69K
(Mind the cable conduit!)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1, K

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable
up to 4° in direction of 0°.

see operating instruction

Maximum operating frequency

600 operating cycles / hour

according to IEC 60947-5-1

one operating cycle includes one opening and one closing action

Mechanical life span

106 operating cycles

Actuating speed

min. 2° / second, max. 90° / second

Electrical features / Safety features

Utilization category

DC 13: 24 Vdc / 2 A (with connector plug)
AC 15: 24 Vac / 2 A

acc. to EN 60947-5-1


Contact termination
8-pole connector M12

Pin and cable assignment

Type of cable

Type N 7 x0,5 mm2, jacket PVC H05VV-F

acc. to IEC 60332-1-2 et seqq.

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC (connector plug) / 250 Vac (cable)

Short-circuit protection

2 A, 500 V, Type gG

Ambient temperature

- 25 °C up to + 80 °C

Degree of pollution, external

3

acc. to EN 60947-5-1

Mission time (TM)

20 years

acc. to EN ISO 13849-1

Number of cycles (B10 d)

5 000 000

acc. to EN 61820-2

Approvals, Conformities, Applicability

Low-voltage switchgear and controlgear
CE declaration
IMQ: CA02.03746
UL: E 131787

EN 60947-1/2007
EN 60947-1-5 : 2004 + A1/2009

Safety applications

until SIL 3 / PL e

acc. to EN ISO 13849-1

Other important details and hints are given in the operating instructions for GN 139.1 hinges which are included with every hinge and which are also available as PDF downloads fromhttps://www.ganter-griff.de/de/service/downloads/betriebsanleitungen.
The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part

Total US Dollars (net)
$184.73
In stock: 0
Call / Email for Delivery Time
Please note our quantity discounts (US Dollars).
MinMaxPrice
19$184.73
1024$169.34
2549$153.95
≥ 50$138.55
Weight: 1.127 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
RoHS compliant: Yes
This article conforms to RoHS, which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code you can find in the picture.



Save as Favorites

Please enter the code you can find in the picture.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
JW Winco - Contact

United States
E-Mail: sales@jwwinco.com
Phone: 800-877-8351
Fax: 800-472-0670
Hours M-F 7:30 AM - 5:00 PM CT

Request Callback:

Privacy Policy

Request a Catalog

Request one of our many catalogs! For an overview of our products request the Product Overview Catalog (POC).

Request Free Catalogs

Sales Contacts

You are looking for a Winco partner near you? Please select the country.