You are here: Product Overview > 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements > Leveling Feet, Leveling Mounts > GN 21 Leveling Feet previous product next product

GN 21 Leveling Feet Stainless Steel, Tapped Socket or Threaded Stud Type, with Turned Base, without Mounting Holes

Photo

GN 21 Inch Thread, Stainless Steel Leveling Feet, Tapped Socket or Threaded Stud Type, with Turned Base, without Mounting Holes Type (Base): D0 - Fine turned, without rubber pad
Version (Stud / Socket): X - External hex, tapped socket type

Type (Base): D0 - Fine turned, without rubber pad
Version (Stud / Socket): X - External hex, tapped socket type

GN 21 Inch Thread, Stainless Steel Leveling Feet, Tapped Socket or Threaded Stud Type, with Turned Base, without Mounting Holes Type (Base): D1 - Fine turned, with rubber pad inlay, black
Version (Stud / Socket): S - Without nut, external hex at the bottom

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 21 Print This Page Load Rating Information Stainless Steel Characteristics Elastomer Characteristics

Product description

Information

GN 21 leveling feet have a machined base and higher load ratings. The unique design of the base with the convex mounting area for the concave ended stud provides not only the ability for the stud to swivel, but also does not allow liquids to build up as it will with other ball socket leveling feet.

These leveling feet are supplied fully assembled and cannot be disassembled.

Specification

Base
Stainless steel AISI 304

Threaded stud / tapped socket
Stainless steel AISI 303

Hex nut
ANSI / ASME B18.2.2
Stainless steel AISI 304

Rubber pad inlay
NBR (Perbunan^®) 70 shore A, black

RoHS compliant

On request

Stud versions T / TK, V / VK and W with certain minimum quantities

Technical drawing

GN 21 Inch Thread, Stainless Steel Leveling Feet, Tapped Socket or Threaded Stud Type, with Turned Base, without Mounting Holes sketch

Hide technical drawing

Part Options / Table

Type (Base)

D0	Fine turned, without rubber pad
D1	Fine turned, with rubber pad inlay, black

Version (Stud / Socket)

S	Without nut, external hex at the bottom
SK	With nut, external hex at the bottom
U	Without nut, internal hex at the top, wrench flat at the bottom
UK	With nut, internal hex at the top, wrench flat at the bottom
X	External hex, tapped socket type

Part Number D0 - Fine turned, without rubber pad	Part Number D1 - Fine turned, with rubber pad inlay, black	d₁	d₂ Thread	l₁ Version S / SK	Version U / UK	l₇ Version X	h₁	h₂	k

21-80-5/16X18-34-D0-X		3.15	5/16 x 18	-	-	1.34	0.33	-	2.15
	21-80-5/16X18-34-D1-X	3.15	5/16 x 18	-	-	1.34	0.33	0.08	2.15
21-80-3/8X16-37-D0-X		3.15	3/8 x 16	-	-	1.46	0.33	-	2.15
	21-80-3/8X16-37-D1-X	3.15	3/8 x 16	-	-	1.46	0.33	0.08	2.15
21-80-1/2X13-40-D0-X		3.15	1/2 x 13	-	-	1.57	0.33	-	2.15
	21-80-1/2X13-40-D1-X	3.15	1/2 x 13	-	-	1.57	0.33	0.08	2.15
21-80-5/8X11-46-D0-X		3.15	5/8 x 11	-	-	1.81	0.33	-	2.15
	21-80-5/8X11-46-D1-X	3.15	5/8 x 11	-	-	1.81	0.33	0.08	2.15
21-80-3/4X10-54-D0-X		3.15	3/4 x 10	-	-	2.13	0.33	-	2.15
	21-80-3/4X10-54-D1-X	3.15	3/4 x 10	-	-	2.13	0.33	0.08	2.15
21-100-5/16X18-35-D0-X		3.94	5/16 x 18	-	-	1.38	0.35	-	2.78
	21-100-5/16X18-35-D1-X	3.94	5/16 x 18	-	-	1.38	0.35	0.12	2.78
21-100-3/8X16-38-D0-X		3.94	3/8 x 16	-	-	1.50	0.35	-	2.78
	21-100-3/8X16-38-D1-X	3.94	3/8 x 16	-	-	1.50	0.35	0.12	2.78
21-100-1/2X13-41-D0-X		3.94	1/2 x 13	-	-	1.61	0.35	-	2.78
	21-100-1/2X13-41-D1-X	3.94	1/2 x 13	-	-	1.61	0.35	0.12	2.78
21-100-5/8X11-47-D0-X		3.94	5/8 x 11	-	-	1.85	0.35	-	2.78
	21-100-5/8X11-47-D1-X	3.94	5/8 x 11	-	-	1.85	0.35	0.12	2.78
21-100-3/4X10-55-D0-X		3.94	3/4 x 10	-	-	2.17	0.35	-	2.78
	21-100-3/4X10-55-D1-X	3.94	3/4 x 10	-	-	2.17	0.35	0.12	2.78
21-120-3/4X10-59-D0-X		4.72	3/4 x 10	-	-	2.32	0.47	-	3.76
	21-120-3/4X10-59-D1-X	4.72	3/4 x 10	-	-	2.32	0.47	0.14	3.76

Part Number D0 - Fine turned, without rubber pad	Part Number D1 - Fine turned, with rubber pad inlay, black	d₁	d₂ Thread	l₁ Version S / SK	Version U / UK	l₇ Version X	h₁	h₂	k

21-80-3/8X16-75-D0-S		3.15	3/8 x 16	2.95	-	-	0.33	-	2.15
	21-80-3/8X16-75-D1-S	3.15	3/8 x 16	2.95	-	-	0.33	0.08	2.15
21-80-3/8X16-100-D0-S		3.15	3/8 x 16	3.94	-	-	0.33	-	2.15
	21-80-3/8X16-100-D1-S	3.15	3/8 x 16	3.94	-	-	0.33	0.08	2.15
21-80-3/8X16-125-D0-S		3.15	3/8 x 16	4.92	-	-	0.33	-	2.15
	21-80-3/8X16-125-D1-S	3.15	3/8 x 16	4.92	-	-	0.33	0.08	2.15
21-80-3/8X16-150-D0-S		3.15	3/8 x 16	5.91	-	-	0.33	-	2.15
	21-80-3/8X16-150-D1-S	3.15	3/8 x 16	5.91	-	-	0.33	0.08	2.15
21-80-1/2X13-75-D0-S		3.15	1/2 x 13	2.95	-	-	0.33	-	2.15
	21-80-1/2X13-75-D1-S	3.15	1/2 x 13	2.95	-	-	0.33	0.08	2.15
21-80-1/2X13-100-D0-S		3.15	1/2 x 13	3.94	-	-	0.33	-	2.15
	21-80-1/2X13-100-D1-S	3.15	1/2 x 13	3.94	-	-	0.33	0.08	2.15
21-80-1/2X13-125-D0-S		3.15	1/2 x 13	4.92	-	-	0.33	-	2.15
	21-80-1/2X13-125-D1-S	3.15	1/2 x 13	4.92	-	-	0.33	0.08	2.15
21-80-1/2X13-150-D0-S		3.15	1/2 x 13	5.91	-	-	0.33	-	2.15
	21-80-1/2X13-150-D1-S	3.15	1/2 x 13	5.91	-	-	0.33	0.08	2.15
21-100-3/8X16-75-D0-S		3.94	3/8 x 16	2.95	-	-	0.35	-	2.78
	21-100-3/8X16-75-D1-S	3.94	3/8 x 16	2.95	-	-	0.35	0.12	2.78
21-100-3/8X16-100-D0-S		3.94	3/8 x 16	3.94	-	-	0.35	-	2.78
	21-100-3/8X16-100-D1-S	3.94	3/8 x 16	3.94	-	-	0.35	0.12	2.78
21-100-3/8X16-125-D0-S		3.94	3/8 x 16	4.92	-	-	0.35	-	2.78
	21-100-3/8X16-125-D1-S	3.94	3/8 x 16	4.92	-	-	0.35	0.12	2.78
21-100-3/8X16-150-D0-S		3.94	3/8 x 16	5.91	-	-	0.35	-	2.78
	21-100-3/8X16-150-D1-S	3.94	3/8 x 16	5.91	-	-	0.35	0.12	2.78
21-100-1/2X13-75-D0-S		3.94	1/2 x 13	2.95	-	-	0.35	-	2.78
	21-100-1/2X13-75-D1-S	3.94	1/2 x 13	2.95	-	-	0.35	0.12	2.78
21-100-1/2X13-100-D0-S		3.94	1/2 x 13	3.94	-	-	0.35	-	2.78
	21-100-1/2X13-100-D1-S	3.94	1/2 x 13	3.94	-	-	0.35	0.12	2.78
21-100-1/2X13-125-D0-S		3.94	1/2 x 13	4.92	-	-	0.35	-	2.78
	21-100-1/2X13-125-D1-S	3.94	1/2 x 13	4.92	-	-	0.35	0.12	2.78
21-100-1/2X13-150-D0-S		3.94	1/2 x 13	5.91	-	-	0.35	-	2.78
	21-100-1/2X13-150-D1-S	3.94	1/2 x 13	5.91	-	-	0.35	0.12	2.78

Part Number D0 - Fine turned, without rubber pad	Part Number D1 - Fine turned, with rubber pad inlay, black	d₁	d₂ Thread	l₁ Version S / SK	Version U / UK	l₇ Version X	h₁	h₂	k

21-80-3/8X16-75-D0-SK		3.15	3/8 x 16	2.95	-	-	0.33	-	2.15
	21-80-3/8X16-75-D1-SK	3.15	3/8 x 16	2.95	-	-	0.33	0.08	2.15
21-80-3/8X16-100-D0-SK		3.15	3/8 x 16	3.94	-	-	0.33	-	2.15
	21-80-3/8X16-100-D1-SK	3.15	3/8 x 16	3.94	-	-	0.33	0.08	2.15
21-80-3/8X16-125-D0-SK		3.15	3/8 x 16	4.92	-	-	0.33	-	2.15
	21-80-3/8X16-125-D1-SK	3.15	3/8 x 16	4.92	-	-	0.33	0.08	2.15
21-80-3/8X16-150-D0-SK		3.15	3/8 x 16	5.91	-	-	0.33	-	2.15
	21-80-3/8X16-150-D1-SK	3.15	3/8 x 16	5.91	-	-	0.33	0.08	2.15
21-80-1/2X13-75-D0-SK		3.15	1/2 x 13	2.95	-	-	0.33	-	2.15
	21-80-1/2X13-75-D1-SK	3.15	1/2 x 13	2.95	-	-	0.33	0.08	2.15
21-80-1/2X13-100-D0-SK		3.15	1/2 x 13	3.94	-	-	0.33	-	2.15
	21-80-1/2X13-100-D1-SK	3.15	1/2 x 13	3.94	-	-	0.33	0.08	2.15
21-80-1/2X13-125-D0-SK		3.15	1/2 x 13	4.92	-	-	0.33	-	2.15
	21-80-1/2X13-125-D1-SK	3.15	1/2 x 13	4.92	-	-	0.33	0.08	2.15
21-80-1/2X13-150-D0-SK		3.15	1/2 x 13	5.91	-	-	0.33	-	2.15
	21-80-1/2X13-150-D1-SK	3.15	1/2 x 13	5.91	-	-	0.33	0.08	2.15
21-100-3/8X16-75-D0-SK		3.94	3/8 x 16	2.95	-	-	0.35	-	2.78
	21-100-3/8X16-75-D1-SK	3.94	3/8 x 16	2.95	-	-	0.35	0.12	2.78
21-100-3/8X16-100-D0-SK		3.94	3/8 x 16	3.94	-	-	0.35	-	2.78
	21-100-3/8X16-100-D1-SK	3.94	3/8 x 16	3.94	-	-	0.35	0.12	2.78
21-100-3/8X16-125-D0-SK		3.94	3/8 x 16	4.92	-	-	0.35	-	2.78
	21-100-3/8X16-125-D1-SK	3.94	3/8 x 16	4.92	-	-	0.35	0.12	2.78
21-100-3/8X16-150-D0-SK		3.94	3/8 x 16	5.91	-	-	0.35	-	2.78
	21-100-3/8X16-150-D1-SK	3.94	3/8 x 16	5.91	-	-	0.35	0.12	2.78
21-100-1/2X13-75-D0-SK		3.94	1/2 x 13	2.95	-	-	0.35	-	2.78
	21-100-1/2X13-75-D1-SK	3.94	1/2 x 13	2.95	-	-	0.35	0.12	2.78
21-100-1/2X13-100-D0-SK		3.94	1/2 x 13	3.94	-	-	0.35	-	2.78
	21-100-1/2X13-100-D1-SK	3.94	1/2 x 13	3.94	-	-	0.35	0.12	2.78
21-100-1/2X13-125-D0-SK		3.94	1/2 x 13	4.92	-	-	0.35	-	2.78
	21-100-1/2X13-125-D1-SK	3.94	1/2 x 13	4.92	-	-	0.35	0.12	2.78
21-100-1/2X13-150-D0-SK		3.94	1/2 x 13	5.91	-	-	0.35	-	2.78
	21-100-1/2X13-150-D1-SK	3.94	1/2 x 13	5.91	-	-	0.35	0.12	2.78

Part Number D0 - Fine turned, without rubber pad	Part Number D1 - Fine turned, with rubber pad inlay, black	d₁	d₂ Thread	l₁ Version S / SK	Version U / UK	l₇ Version X	h₁	h₂	k

21-80-5/8X11-75-D0-U		3.15	5/8 x 11	-	2.95	-	0.33	-	2.15
	21-80-5/8X11-75-D1-U	3.15	5/8 x 11	-	2.95	-	0.33	0.08	2.15
21-80-5/8X11-100-D0-U		3.15	5/8 x 11	-	3.94	-	0.33	-	2.15
	21-80-5/8X11-100-D1-U	3.15	5/8 x 11	-	3.94	-	0.33	0.08	2.15
21-80-5/8X11-125-D0-U		3.15	5/8 x 11	-	4.92	-	0.33	-	2.15
	21-80-5/8X11-125-D1-U	3.15	5/8 x 11	-	4.92	-	0.33	0.08	2.15
21-80-5/8X11-150-D0-U		3.15	5/8 x 11	-	5.91	-	0.33	-	2.15
	21-80-5/8X11-150-D1-U	3.15	5/8 x 11	-	5.91	-	0.33	0.08	2.15
21-80-3/4X10-100-D0-U		3.15	3/4 x 10	-	3.94	-	0.33	-	2.15
	21-80-3/4X10-100-D1-U	3.15	3/4 x 10	-	3.94	-	0.33	0.08	2.15
21-80-3/4X10-125-D0-U		3.15	3/4 x 10	-	4.92	-	0.33	-	2.15
	21-80-3/4X10-125-D1-U	3.15	3/4 x 10	-	4.92	-	0.33	0.08	2.15
21-80-3/4X10-150-D0-U		3.15	3/4 x 10	-	5.91	-	0.33	-	2.15
	21-80-3/4X10-150-D1-U	3.15	3/4 x 10	-	5.91	-	0.33	0.08	2.15
21-100-5/8X11-75-D0-U		3.94	5/8 x 11	-	2.95	-	0.35	-	2.78
	21-100-5/8X11-75-D1-U	3.94	5/8 x 11	-	2.95	-	0.35	0.12	2.78
21-100-5/8X11-100-D0-U		3.94	5/8 x 11	-	3.94	-	0.35	-	2.78
	21-100-5/8X11-100-D1-U	3.94	5/8 x 11	-	3.94	-	0.35	0.12	2.78
21-100-5/8X11-125-D0-U		3.94	5/8 x 11	-	4.92	-	0.35	-	2.78
	21-100-5/8X11-125-D1-U	3.94	5/8 x 11	-	4.92	-	0.35	0.12	2.78
21-100-5/8X11-150-D0-U		3.94	5/8 x 11	-	5.91	-	0.35	-	2.78
	21-100-5/8X11-150-D1-U	3.94	5/8 x 11	-	5.91	-	0.35	0.12	2.78
21-100-3/4X10-100-D0-U		3.94	3/4 x 10	-	3.94	-	0.35	-	2.78
	21-100-3/4X10-100-D1-U	3.94	3/4 x 10	-	3.94	-	0.35	0.12	2.78
21-100-3/4X10-125-D0-U		3.94	3/4 x 10	-	4.92	-	0.35	-	2.78
	21-100-3/4X10-125-D1-U	3.94	3/4 x 10	-	4.92	-	0.35	0.12	2.78
21-100-3/4X10-150-D0-U		3.94	3/4 x 10	-	5.91	-	0.35	-	2.78
	21-100-3/4X10-150-D1-U	3.94	3/4 x 10	-	5.91	-	0.35	0.12	2.78
21-120-3/4X10-100-D0-U		4.72	3/4 x 10	-	3.94	-	0.47	-	3.76
	21-120-3/4X10-100-D1-U	4.72	3/4 x 10	-	3.94	-	0.47	0.14	3.76
21-120-3/4X10-125-D0-U		4.72	3/4 x 10	-	4.92	-	0.47	-	3.76
	21-120-3/4X10-125-D1-U	4.72	3/4 x 10	-	4.92	-	0.47	0.14	3.76
21-120-3/4X10-150-D0-U		4.72	3/4 x 10	-	5.91	-	0.47	-	3.76
	21-120-3/4X10-150-D1-U	4.72	3/4 x 10	-	5.91	-	0.47	0.14	3.76

Part Number D0 - Fine turned, without rubber pad	Part Number D1 - Fine turned, with rubber pad inlay, black	d₁	d₂ Thread	l₁ Version S / SK	Version U / UK	l₇ Version X	h₁	h₂	k

21-80-5/8X11-75-D0-UK		3.15	5/8 x 11	-	2.95	-	0.33	-	2.15
	21-80-5/8X11-75-D1-UK	3.15	5/8 x 11	-	2.95	-	0.33	0.08	2.15
21-80-5/8X11-100-D0-UK		3.15	5/8 x 11	-	3.94	-	0.33	-	2.15
	21-80-5/8X11-100-D1-UK	3.15	5/8 x 11	-	3.94	-	0.33	0.08	2.15
21-80-5/8X11-125-D0-UK		3.15	5/8 x 11	-	4.92	-	0.33	-	2.15
	21-80-5/8X11-125-D1-UK	3.15	5/8 x 11	-	4.92	-	0.33	0.08	2.15
21-80-5/8X11-150-D0-UK		3.15	5/8 x 11	-	5.91	-	0.33	-	2.15
	21-80-5/8X11-150-D1-UK	3.15	5/8 x 11	-	5.91	-	0.33	0.08	2.15
21-80-3/4X10-100-D0-UK		3.15	3/4 x 10	-	3.94	-	0.33	-	2.15
	21-80-3/4X10-100-D1-UK	3.15	3/4 x 10	-	3.94	-	0.33	0.08	2.15
21-80-3/4X10-125-D0-UK		3.15	3/4 x 10	-	4.92	-	0.33	-	2.15
	21-80-3/4X10-125-D1-UK	3.15	3/4 x 10	-	4.92	-	0.33	0.08	2.15
21-80-3/4X10-150-D0-UK		3.15	3/4 x 10	-	5.91	-	0.33	-	2.15
	21-80-3/4X10-150-D1-UK	3.15	3/4 x 10	-	5.91	-	0.33	0.08	2.15
21-100-5/8X11-75-D0-UK		3.94	5/8 x 11	-	2.95	-	0.35	-	2.78
	21-100-5/8X11-75-D1-UK	3.94	5/8 x 11	-	2.95	-	0.35	0.12	2.78
21-100-5/8X11-100-D0-UK		3.94	5/8 x 11	-	3.94	-	0.35	-	2.78
	21-100-5/8X11-100-D1-UK	3.94	5/8 x 11	-	3.94	-	0.35	0.12	2.78
21-100-5/8X11-125-D0-UK		3.94	5/8 x 11	-	4.92	-	0.35	-	2.78
	21-100-5/8X11-125-D1-UK	3.94	5/8 x 11	-	4.92	-	0.35	0.12	2.78
21-100-5/8X11-150-D0-UK		3.94	5/8 x 11	-	5.91	-	0.35	-	2.78
	21-100-5/8X11-150-D1-UK	3.94	5/8 x 11	-	5.91	-	0.35	0.12	2.78
21-100-3/4X10-100-D0-UK		3.94	3/4 x 10	-	3.94	-	0.35	-	2.78
	21-100-3/4X10-100-D1-UK	3.94	3/4 x 10	-	3.94	-	0.35	0.12	2.78
21-100-3/4X10-125-D0-UK		3.94	3/4 x 10	-	4.92	-	0.35	-	2.78
	21-100-3/4X10-125-D1-UK	3.94	3/4 x 10	-	4.92	-	0.35	0.12	2.78
21-100-3/4X10-150-D0-UK		3.94	3/4 x 10	-	5.91	-	0.35	-	2.78
	21-100-3/4X10-150-D1-UK	3.94	3/4 x 10	-	5.91	-	0.35	0.12	2.78
21-120-3/4X10-100-D0-UK		4.72	3/4 x 10	-	3.94	-	0.47	-	3.76
	21-120-3/4X10-100-D1-UK	4.72	3/4 x 10	-	3.94	-	0.47	0.14	3.76
21-120-3/4X10-125-D0-UK		4.72	3/4 x 10	-	4.92	-	0.47	-	3.76
	21-120-3/4X10-125-D1-UK	4.72	3/4 x 10	-	4.92	-	0.47	0.14	3.76
21-120-3/4X10-150-D0-UK		4.72	3/4 x 10	-	5.91	-	0.47	-	3.76
	21-120-3/4X10-150-D1-UK	4.72	3/4 x 10	-	5.91	-	0.47	0.14	3.76

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	d₂ Thread	l₁ Version S / SK				Version U / UK				l₇ Version X	h₁	h₂	k

3.15	5/16 x 18	-	-	-	-	-	-	-	-	1.34	0.33	0.08	2.15
3.15	3/8 x 16	2.95	3.94	4.92	5.91	-	-	-	-	1.46	0.33	0.08	2.15
3.15	1/2 x 13	2.95	3.94	4.92	5.91	-	-	-	-	1.57	0.33	0.08	2.15
3.15	5/8 x 11	-	-	-	-	2.95	3.94	4.92	5.91	1.81	0.33	0.08	2.15
3.15	3/4 x 10	-	-	-	-	3.94	4.92	5.91	-	2.13	0.33	0.08	2.15
3.94	5/16 x 18	-	-	-	-	-	-	-	-	1.38	0.35	0.12	2.78
3.94	3/8 x 16	2.95	3.94	4.92	5.91	-	-	-	-	1.50	0.35	0.12	2.78
3.94	1/2 x 13	2.95	3.94	4.92	5.91	-	-	-	-	1.61	0.35	0.12	2.78
3.94	5/8 x 11	-	-	-	-	2.95	3.94	4.92	5.91	1.85	0.35	0.12	2.78
3.94	3/4 x 10	-	-	-	-	3.94	4.92	5.91	-	2.17	0.35	0.12	2.78
4.72	3/4 x 10	-	-	-	-	3.94	4.92	5.91	-	2.32	0.47	0.14	3.76

Show / Hide columns

Dimensions in: Inch (change to Metric)

d₁	d₂ Thread	h₃	h₄	A/F₁ (inches)	A/F₂ (inches)	A/F₃ (inches)	A/F₇ (inches)	t

3.15	5/16 x 18	-	-	-	-	-	1/2	0.31
3.15	3/8 x 16	0.77	-	11/16	-	-	1/2	0.39
3.15	1/2 x 13	0.77	-	11/16	-	-	5/8	0.47
3.15	5/8 x 11	-	1.00	-	1/2	5/16	7/8	0.63
3.15	3/4 x 10	-	1.06	-	9/16	7/16	1	0.79
3.94	5/16 x 18	-	-	-	-	-	1/2	0.31
3.94	3/8 x 16	0.81	-	11/16	-	-	1/2	0.39
3.94	1/2 x 13	0.81	-	11/16	-	-	5/8	0.47
3.94	5/8 x 11	-	1.04	-	1/2	5/16	7/8	0.63
3.94	3/4 x 10	-	1.10	-	9/16	7/16	1	0.79
4.72	3/4 x 10	-	1.26	-	9/16	7/16	1	0.79

Build & Price

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$61.14

In Stock: 23

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	$61.14
50	99	$56.05
100	249	$50.95
≥ 250		$45.86

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.713 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.