EN 541.3 Prismatic Fluid Sight Glasses Crystal Clear Plastic, with Recessed Seal

Information

EN 541.3 prismatic fluid sight glasses made of polyamide plastic have a high mechanical strength. Therefore, they can be produced with thinner walls.

These fluid sight glasses use the prismatic effect of a cat’s eye to give a clear indication of the fluid level unaffected by fluid color or fluid viscosity. The advantage of this effect is particularly obvious in the case of underfilling or overfilling and for inspection under unfavorable light conditions.

These fluid sight glasses can also be used on pressurized tanks. Tests regarding maximum pressure are available.

Assembly note:
For wall thicknesses below 4 mm, use GN 7430 thin hexagon nuts.

Specification

Body
Plastic
Crystal clear Polyamide PA-T

• Aging resistant
• High mechanical strength
• Temperature resistant up to 212 °F (100 °C)
• Solvent resistant,
  but not alcohol resistant
  

---

Seal
Rubber NBR (Perbunan^®)

RoHS compliant

Accessory

Thin hexagon nuts GN 7430