The cart is empty.

Empty cart Open cart

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

1-800-877-8351 sales@jwwinco.com

Request Callback

Full name Phone number Company Country Yes, I have noted the Privacy Policy.

JW Winco Handbook
JW Winco’s handbook will support designers and engineers with the largest selection of standard parts.

Request Free Catalogs
Your Contact

You are looking for a Winco partner near you?

Select State

Select State

Please select the country.

Send a message

JW Winco News
All the information you need about news from JW Winco!

All News

GN 648.1 Rod End Bearings Steel, Tapped Type

Rod End Bearings GN 648.1: Steel, Tapped Type

Type: N - Brass / steel, lubrication possible

Further Information on Rod End Bearings as well as Load Values, Page 1 Further Information on Spherical Plain Bearings as well as Load Values, Page 2 ISO Fundamental Tolerances

Product description

Rod end bearings GN 648.1 are a mechanical articulating joint that transmit traction and thrust from linkages and lever arms and are resistant to wear, especially under high alternating loads and impact in a radial / axial direction. Rod end bearings are used on the ends of control rods, steering links and tie rods.

Specification

Housing
Steel, zinc plated, blue passivated finish

d₁ = 5 up to 12 mm: machined
d₁ = 14 up to 25 mm: forged

Bearing socket

Type N (lubrication possible)
Brass, CuZn40Al
Type W (self- ubricating)
Steel, zinc plated, with PTFE-insert

Internal ring
Steel, 100Cr6
Hardened, ground, polished finish

RoHS

On request

Narrow model (ISO 12240-1, series E)

GN 648.1 Steel Rod End Bearings, Tapped Type sketch

Hide technical drawing

Part Options / Table

Type

N	Brass / steel, lubrication possible
W	Steel PTFE / steel, self lubricated

Part Number	d₁ H7 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F

648.1-5-M5L-N	0.197 H7	M 5L	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M5-N	0.197 H7	M 5	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M4-N	0.197 H7	M 4	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-6-M6L-N	0.236 H7	M 6L	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-6-M6-N	0.236 H7	M 6	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-8-M8L-N	0.315 H7	M 8L	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-8-M8-N	0.315 H7	M 8	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-10-M10L-N	0.394 H7	M 10L	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10-N	0.394 H7	M 10	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10X1.25-N	0.394 H7	M 10 x 1.25	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-12-M12L-N	0.472 H7	M 12L	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12-N	0.472 H7	M 12	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12X1.25-N	0.472 H7	M 12 x 1.25	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-14-M14L-N	0.551 H7	M 14L	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-14-M14-N	0.551 H7	M 14	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-16-M16L-N	0.630 H7	M 16L	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16-N	0.630 H7	M 16	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16X1.5-N	0.630 H7	M 16 x 1.5	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-18-M18X1.5L-N	0.709 H7	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-18-M18X1.5-N	0.709 H7	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-20-M20X1.5L-N	0.787 H7	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-20-M20X1.5-N	0.787 H7	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-22-M22X1.5L-N	0.866 H7	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-22-M22X1.5-N	0.866 H7	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-25-M24X2L-N	0.984 H7	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-25-M24X2-N	0.984 H7	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°

Part Number	d₁ H7 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F

648.1-5-M5L-W	0.197 H7	M 5L	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M5-W	0.197 H7	M 5	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M4-W	0.197 H7	M 4	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-6-M6L-W	0.236 H7	M 6L	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-6-M6-W	0.236 H7	M 6	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-8-M8L-W	0.315 H7	M 8L	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-8-M8-W	0.315 H7	M 8	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-10-M10L-W	0.394 H7	M 10L	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10-W	0.394 H7	M 10	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10X1.25-W	0.394 H7	M 10 x 1.25	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-12-M12L-W	0.472 H7	M 12L	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12-W	0.472 H7	M 12	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12X1.25-W	0.472 H7	M 12 x 1.25	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-14-M14L-W	0.551 H7	M 14L	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-14-M14-W	0.551 H7	M 14	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-16-M16L-W	0.630 H7	M 16L	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16-W	0.630 H7	M 16	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16X1.5-W	0.630 H7	M 16 x 1.5	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-18-M18X1.5L-W	0.709 H7	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-18-M18X1.5-W	0.709 H7	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-20-M20X1.5L-W	0.787 H7	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-20-M20X1.5-W	0.787 H7	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-22-M22X1.5L-W	0.866 H7	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-22-M22X1.5-W	0.866 H7	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-25-M24X2L-W	0.984 H7	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-25-M24X2-W	0.984 H7	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-30-M30X2L-W	1.181 H7*	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°
648.1-30-M30X2-W	1.181 H7*	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°

Show / Hide columns

Metric

d₁ H7 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F	t	w Max. tilting angle

0.197	M 5	M 5L	M 4	0.315	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
0.236	M 6	M 6L	-	0.354	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
0.315	M 8	M 8L	-	0.472	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
0.394	M 10	M 10L	M 10 x 1.25	0.551	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
0.472	M 12	M 12L	M 12 x 1.25	0.630	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
0.551	M 14	M 14L	-	0.748	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
0.630	M 16	M 16L	M 16 x 1.5	0.827	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
0.709	M 18 x 1.5	M 18 x 1.5L	-	0.906	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
0.787	M 20 x 1.5	M 20 x 1.5L	-	0.984	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
0.866	M 22 x 1.5	M 22 x 1.5L	-	1.102	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
0.984	M 24 x 2	M 24 x 2L	-	1.220	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
1.181*	M 30 x 2	M 30 x 2L	-	1.457	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°

* Only available in type W

Build & Price

Selected Part

Part Number

Total (net)

US$18.73

Call / Email for Delivery Time

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	US$18.73
50	99	US$17.17
100	249	US$15.61
≥ 250		US$14.05

Prop 65: -

Please contact our Sales Department for more information.

RoHS: -

No details on RoHS compatibility are available at this time. Please contact our Sales Department for more information.

Weight: 0.044 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

Your Contact

You are looking for a Winco partner near you?

Please select the country.

Select State

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

1-800-877-8351 sales@jwwinco.com

Request Callback

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

JW Winco News

GN 648.1 Rod End Bearings Steel, Tapped Type

Product description

Specification

On request

Part Options / Table

Type

Type: N - Brass / steel, lubrication possible

Type: W - Steel PTFE / steel, self lubricated

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 648.2

GN 648.5

GN 648.8

Your Contact

JW Winco Services