EN 636 Ergostyle® Seven-Lobed Knobs Technopolymer Plastic, with Tapped or Plain Bore Insert

Photo

EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DOR - Orange, RAL 2004, matte finish
ELESA original design
code: ELK.
Type: B - With plain through bore, tol H7
Color: DOR - Orange, RAL 2004, matte finish
EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DOR - Orange, RAL 2004, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DBL - Blue, RAL 5024, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DGB - Yellow, RAL 1021, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DGR - Gray, RAL 7035, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DRT - Red, RAL 3000, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: B - With plain through bore, tol H7
Color: DSG - Black-gray, RAL 7021, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DBL - Blue, RAL 5024, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DGB - Yellow, RAL 1021, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DGR - Gray, RAL 7035, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DOR - Orange, RAL 2004, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DRT - Red, RAL 3000, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: C - With plain blind bore, tol. H9
Color: DSG - Black-gray, RAL 7021, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DBL - Blue, RAL 5024, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DGB - Yellow, RAL 1021, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DGR - Gray, RAL 7035, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DOR - Orange, RAL 2004, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DRT - Red, RAL 3000, matte finish EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert Type: E - With tapped blind bore
Color: DSG - Black-gray, RAL 7021, matte finish

Product Family Ergostyle

Ergostyle standard parts combine functional and ergonomic operation with attractive appearance. Numerous design awards are proof of the high quality claim. The hallmark of Ergostyle products are five small dots.

  • functional, ergonomic design
  • ultimate design quality (numerous design awards)
Show all Ergostyle products

Product description

Information

The operator's palm rests on the slightly concave front surface of the EN 636 Ergostyle® seven-lobed knobs, while the fingers are offered a natural ergonomic position inside the rear lobes of the knob. In this position, the operator can apply maximum torque with minimum force.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Seven-lobed knob
Plastic
Technopolymer (Polyamide PA)
  • Glass fiber reinforced
  • Temperature resistant up to 266 °F (130 °C)
  • Black-gray, matte finish,
    similar to RAL 7021

Color of the upper part:
Black-gray, RAL 7021, matte finishDSGDSG
Orange, RAL 2004, matte finishDORDOR
Gray, RAL 7035, matte finishDGRDGR
Yellow*, RAL 1021, matte finishDGBDGB
Blue*, RAL 5024, matte finishDBLDBL
Red*, RAL 3000, matte finishDRTDRT

Lobed knob upper part is ultrasonically welded to lower part

Tapped insert
Type B / C: Steel, blackened finish
Type E: Brass


RoHS compliant

On request

Special inch and metric size plain through bores

Technical drawing

Hide technical drawing
EN 636 Technopolymer Plastic Ergostyle® Seven-Lobed Knobs, with Tapped or Plain Bore Insert sketch

Part Options / Table

Type

EWith tapped blind bore
CWith plain blind bore, tol. H9
BWith plain through bore, tol H7
Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)
d1d2
Thread
Type E
d3 +0.002
Blind bore
Type C
d4 +0.001
Through bore
Type B
d5d6d7h1h2Length lt1
min.
t2
2.205/16 x 18B 5/16-.87.911.041.14.43.87.51.55
2.763/8 x 16B 3/8-1.021.101.281.38.511.06.67.83
Show / Hide columns

Metric

Dimensions in: Inch | Metric
d1d2
Thread
Type E
d3 +0.002
Blind bore
Type C
d4 +0.001
Through bore
Type B
d5d6d7h1h2Length lt1
min.
t2
1.77M 6M 8-B 8---.831.02.39-.47.55
2.20M 8M 10M 12B 8B 10.87.911.041.14.43.87.51.55
2.76M 10M 12M 16B 10B 121.021.101.281.38.511.06.67.83
* Not available from stock, requires a minimum order quantity

Build & Price

Handle diameter d1
Thread d2

Inch


Metric


Bore d3

Inch


Metric


Bore d4
Type



Color
DBL
DGB
DGR
DOR
DRT
DSG

Selected Part

Total USD (net)
$8.73
In stock: 0
Call / Email for Delivery Time
Please note our quantity discounts (USD).
MinMaxPrice
199$8.73
100249$8.00
250499$7.28
≥ 500$6.55
Weight: 0.093 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
RoHS compliant: -
This part is new in our product range, no details are available at this time. For more recent details on the RoHS compatibility, please contact our Sales Department!
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code you can find in the picture.



Save as Favorites

Please enter the code you can find in the picture.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time:800-877-8351

Special Requests | Contact our sales team

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
JW Winco - Contact

United States
E-Mail: sales@jwwinco.com
Phone: 800-877-8351
Fax: 800-472-0670
Hours M-F 7:30 AM - 5:00 PM CT

Request Callback:

Privacy Policy

Request a Catalog

Request one of our many catalogs! For an overview of our products request the Product Overview Catalog (POC).

Request Free Catalogs

Sales Contacts

You are looking for a Winco partner near you? Please select the country.