GN 1408 Telescopic Slides Steel, with Full Extension, Load Capacity up to 56 lbf

Photo

Product description

Information

GN 1408 telescopic slides are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension).

The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

Specification

Slide profile
Steel, zinc plated, blue passivated finish

Bearings
Roller bearing steel, hardened

Ball cage, outer slide
Plastic

Ball cage, inner slide
Steel, zinc plated

Rubber stop and detach function
Plastic / Elastomer

Operating temperature
-4 °F to 212 °F (-20 °C to 100 °C)




RoHS compliant

On request

Other lengths and hole spacing
Other attachment options
Other surfaces

Technical drawing

3D
Hide technical drawing
GN 1408 Steel Telescopic Slides, with Full Extension, Load Capacity up to 56 lbf sketch

Part Options / Table

Type

FWith rubber stop, locking device in back, detach function

Identification no.

1Fastening using through-holes
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
l1l2 +0.12/-0.12
Stroke
l3Fs per pair
at 10,000 cycles

at 100.000 cycles
9.849.8419.6944.96 lbf (200 N)33.72 lbf (150 N)
11.8111.8123.6244.96 lbf (200 N)33.72 lbf (150 N)
13.7813.7827.5649.46 lbf (220 N)40.47 lbf (180 N)
15.7515.7531.5056.20 lbf (250 N)44.96 lbf (200 N)
17.7217.7235.4356.20 lbf (250 N)44.96 lbf (200 N)
19.6919.6939.3749.46 lbf (220 N)40.47 lbf (180 N)
21.6521.6543.3149.46 lbf (220 N)40.47 lbf (180 N)
23.6223.6247.2444.96 lbf (200 N)33.72 lbf (150 N)
25.5925.5951.1844.96 lbf (200 N)33.72 lbf (150 N)
27.5627.5655.1244.96 lbf (200 N)33.72 lbf (150 N)

Build & Price

Length l1
Type

Identification no.

Finish

Mounting holes - outer slide

Show / Hide columns
l1a2a3a4a5a6a7a8a9a10
250-65-195210225---
30099129195257272----
35099129185259274289---
40099129-259274-323338353
45099129185259274289387402417
50099129185291306321451466481
55099129185323338353483498513
60099129185323338353515530545
65099129185355370385579594545
70099129185387402417643658673

Mounting holes - inner slide

Show / Hide columns
l1i4i5i6i7i8i9
250195211220---
300114130139227243252
350163179188291307316
400163179188355371380
450195211220387403412
500227243252451467476
550259275284483499508
600259275284515531540
650291307316579595604
700323339348643659668

Fastening screws

For the said loading forces FS to be absorbed reliably in the surrounding structure, all available through-holes of the outer slide having a diameter (Ø) of 4.2 and of the inner slide having a diameter (Ø) of 4.4 must be used. The elongated holes, Ø 4.2 x 4.4 of the outer slide and Ø 4.4 x 4.6 of the inner slide, are used likewise for fastening and facilitate adjustment during mounting when needed. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting:

Designation - standard
Hexagon socket button
head screw ISO 7380
Pan head screw,
Phillips ISO 7045
Pan head tapping screw,
Phillips ISO 7049

Outer slide

M 4

M 4

ST 3.9 / 4.2

Inner slide

M 4

M 4

ST 3.9 / 4.2

Rubber stop, locking device in back

The rubber stops of type F dampen the impact of the slide in the respective end position. This feature minimizes noise development and increases the lifespan. Attached to the slides in a partially concealed, partially visible manner, the stops meet each of the requirements in regard to shape, material, and hardness.
The rubber stop takes on also a locking function in the back stop position. This feature is noticeable through a slight resistance on opening and closing the slide.
If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.

Detach function

Type F has additionally a detach function through which the extension slides can be completely separated from one another in the area of the middle and inner slide. This feature not only facilitates mounting. It also allows the extension to be quickly removed, for example, when frequent maintenance work is performed on the components located behind.

The telescopic slide can be quickly and easily detached in the extracted position through activation of the release lever, allowing the inner slide to be removed from the front.

For reattaching the slides, the ball cages need to be moved to the front end position. Then the inner slide is inserted to the back end stop where it locks into place automatically.

The protected arrangement of the release mechanism prevents accidental detachment of the slide.

Selected Part

Total US Dollars (net)
$15.04
In stock: 0
Call / Email for Delivery Time
Please note our quantity discounts (US Dollars).
MinMaxPrice
19$15.04
1024$13.78
2549$12.53
≥ 50$11.28
Weight: -
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
RoHS compliant: -
This part is new in our product range, no details are available at this time. For more recent details on the RoHS compatibility, please contact our Sales Department!
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code you can find in the picture.



Save as Favorites

Please enter the code you can find in the picture.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
JW Winco - Contact

United States
E-Mail: sales@jwwinco.com
Phone: 800-877-8351
Fax: 800-472-0670
Hours M-F 7:30 AM - 5:00 PM CT

Request Callback:

Privacy Policy

Request a Catalog

Request one of our many catalogs! For an overview of our products request the Product Overview Catalog (POC).

Request Free Catalogs

Sales Contacts

You are looking for a Winco partner near you? Please select the country.