GN 412 Indexing Plungers Zinc Die-Cast, Lock-Out and Non Lock-Out, with Mounting Flange

Photo

GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: B - Non lock-out
Identification no.: 1 - Mounting from the front
Type: B - Non lock-out
Identification no.: 1 - Mounting from the front
GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: B - Non lock-out
Identification no.: 1 - Mounting from the front GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: B - Non lock-out
Identification no.: 2 - Mounting from the back GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: C - Lock-out
Identification no.: 1 - Mounting from the front GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange Type: C - Lock-out
Identification no.: 2 - Mounting from the back
Accessories-for-profile-systems

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm
Show All Compatible Products

Product description

Information

The outstanding feature of GN 412 indexing plungers is their compact design. They are mounted either from the front with socket cap screws or from the back via the tapped threaded holes.

In type C, the knob can be turned by 30° after retracting the plunger pin, holding it in the "retracted" position using the indexing lock.

The dimensions and connection measurements match the combination with GN 412.1 mounting blocks in connection with GN 412.2 or GN 412.3 locating bushings.

Specification

Housing
Zinc die-cast
Powder coated
Black, textured finish


Plunger pin
Stainless steel AISI 303


Spring
Stainless steel AISI 301


Knob
Plastic
Technopolymer (Polyamide PA)

  • Temperature resistant up to 230 °F (110 °C)
  • Black, matte finish
  • Not removable

RoHS

On request

With red knob

Technical drawing

3D
Hide technical drawing
GN 412 Zinc Die-Cast Indexing Plungers, Lock-Out and Non Lock-Out, with Mounting Flange sketch

Part Options / Table

Type

BNon lock-out
CLock-out

Identification no.

1Mounting from the front
2Mounting from the back
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
d1
Pin 0/-0.002
Bore +0.002/+0.004
bd2d3d4hkl1l2
min.
l3l4sA/FtSpring load ≈
Initial

End
0.201.380.17M 40.981.020.981.260.240.240.550.470.470.391.12 lbf (5 N)3.37 lbf (15 N)
0.241.380.17M 40.981.020.981.260.240.240.550.470.470.391.12 lbf (5 N)3.37 lbf (15 N)
0.311.850.21M 51.301.341.381.540.390.390.710.550.670.472.02 lbf (9 N)7.87 lbf (35 N)
0.391.850.21M 51.301.341.381.540.390.390.710.550.670.472.02 lbf (9 N)7.87 lbf (35 N)

Build & Price

3D Product Configurator
Pin diameter d1
Width b
Type


Identification no.


Selected Part

Total US Dollars (net)
$10.04
In Stock: 88
In Stock
Please note our quantity discounts (US Dollars).
MinMaxPrice
199$10.04
100249$9.20
250499$8.37
≥ 500$7.53
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.138 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 412-5-35-B-1GN 412-5-35-C-1GN 412-5-35-B-2GN 412-5-35-C-2GN 412-6-35-B-1GN 412-6-35-C-1GN 412-6-35-B-2GN 412-6-35-C-2GN 412-8-47-B-1GN 412-8-47-C-1GN 412-8-47-B-2GN 412-8-47-C-2GN 412-10-47-B-1GN 412-10-47-C-1GN 412-10-47-B-2GN 412-10-47-C-2

This could also be interesting...

Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.