With serrated locking plates GN 187.4, components can be adjusted and locked form-fit at a defined angle.
The angle position of the serration is adapted to the mounting holes, ensuring an parallel or right-angled arrangement. The tooth count of 48 / 60 enables the adjustment in 7.5° or 6° steps, resulting in the indexing positions listed in the separate table.
The range of types makes these plates adaptable for almost any application. Useful complimentary components include guide housings GN 187.1 and conical thrust springs GN 187.2.
Specification
SteelST (Distaloy AB)
Sintered
Type A, B C, D
Hardened
Black steam oxidized
Type E
Plain finish
Not hardened
RoHS
Technical drawing
Hide technical drawing
Part Options / Table
Type
A
With tapped bore d3 in the center, with two countersunk bores for socket cap screws
B
With bore d4 in the center, with two countersunk bores for socket cap screws
C
With tapped bore d3 in the center, with two tapped bores to screw on
D
With bore d4 in the center, with two tapped bores to screw on
E
Without bores
Type: A - With tapped bore d~3~ in the center, with two countersunk bores for socket cap screws
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.028 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351