Rod End Bearings GN 648.1

Type: N - Brass / steel, lubrication possible

Standard Sheet GN 648.1 Print This Page Further Information on Rod End Bearings as well as Load Values, Page 1 Further Information on Spherical Plain Bearings as well as Load Values, Page 2 ISO Fundamental Tolerances

Product description

Rod end bearings GN 648.1 are a mechanical articulating joint that transmit traction and thrust from linkages and lever arms and are resistant to wear, especially under high alternating loads and impact in a radial / axial direction. Rod end bearings are used on the ends of control rods, steering links and tie rods.

Specification

Housing
Steel, zinc plated, blue passivated finish

d₁ = 5 to 12 mm: turned
d₁ = 14 to 25 mm: forged

Pairings

Type N (lubrication possible)
Bearing socket
Brass, CuZn40Al1

Internal ring
Steel, 100 Cr6
Hardened, ground, polished

Type W (self-lubricating)
Bearing socket
Steel, zinc plated
With PTFE insert

Internal ring
Steel, 100Cr6
Hardened, ground, polished

RoHS

On request

Narrow model (ISO 12240-1, series E)

GN 648.1 Steel Rod End Bearings, Tapped Type sketch

Hide technical drawing

Part Options / Table

Type (Pairings)

N	Brass / steel, lubrication possible
W	Steel PTFE / steel, self lubricated

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F

648.1-5-M5L-N	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M5-N	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M4-N	0.197 +0.001	M 4	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-6-M6L-N	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-6-M6-N	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-8-M8L-N	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-8-M8-N	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-10-M10L-N	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10-N	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10X1.25-N	0.394 +0.001	M 10 x 1.25	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-12-M12L-N	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12-N	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12X1.25-N	0.472 +0.001	M 12 x 1.25	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-14-M14L-N	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-14-M14-N	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-16-M16L-N	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16-N	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16X1.5-N	0.630 +0.001	M 16 x 1.5	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-18-M18X1.5L-N	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-18-M18X1.5-N	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-20-M20X1.5L-N	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-20-M20X1.5-N	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-22-M22X1.5L-N	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-22-M22X1.5-N	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-25-M24X2L-N	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-25-M24X2-N	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F

648.1-5-M5L-W	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M5-W	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-5-M4-W	0.197 +0.001	M 4	0.315 -0.005	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
648.1-6-M6L-W	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-6-M6-W	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
648.1-8-M8L-W	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-8-M8-W	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
648.1-10-M10L-W	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10-W	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-10-M10X1.25-W	0.394 +0.001	M 10 x 1.25	0.551 -0.005	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
648.1-12-M12L-W	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12-W	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-12-M12X1.25-W	0.472 +0.001	M 12 x 1.25	0.630 -0.005	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
648.1-14-M14L-W	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-14-M14-W	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
648.1-16-M16L-W	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16-W	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-16-M16X1.5-W	0.630 +0.001	M 16 x 1.5	0.827 -0.005	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
648.1-18-M18X1.5L-W	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-18-M18X1.5-W	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
648.1-20-M20X1.5L-W	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-20-M20X1.5-W	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
648.1-22-M22X1.5L-W	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-22-M22X1.5-W	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
648.1-25-M24X2L-W	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-25-M24X2-W	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
648.1-30-M30X2L-W	1.181 +0.001	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°
648.1-30-M30X2-W	1.181 +0.001	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	CETOP connecting dimensions	b₁ -0.005	b₂	d₃	d₄	d₅	d₆	l₁	l₂	A/F	t	w Max. tilting angle

0.197	M 5	M 5L	M 4	0.315	0.24	0.30	0.71	0.35	0.43	1.06	1.42	0.35	0.39	13°
0.236	M 6	M 6L	-	0.354	0.27	0.35	0.79	0.39	0.51	1.18	1.57	0.43	0.47	13°
0.315	M 8	M 8L	-	0.472	0.35	0.41	0.94	0.49	0.63	1.42	1.89	0.51	0.63	14°
0.394	M 10	M 10L	M 10 x 1.25	0.551	0.41	0.51	1.10	0.59	0.75	1.69	2.24	0.67	0.79	13°
0.472	M 12	M 12L	M 12 x 1.25	0.630	0.47	0.61	1.26	0.69	0.87	1.97	2.60	0.75	0.87	13°
0.551	M 14	M 14L	-	0.748	0.53	0.66	1.42	0.79	0.98	2.24	2.95	0.87	0.98	16°
0.630	M 16	M 16L	M 16 x 1.5	0.827	0.59	0.76	1.65	0.87	1.06	2.52	3.35	0.87	1.10	15°
0.709	M 18 x 1.5	M 18 x 1.5L	-	0.906	0.65	0.86	1.81	0.98	1.22	2.80	3.70	1.06	1.26	15°
0.787	M 20 x 1.5	M 20 x 1.5L	-	0.984	0.71	0.96	1.97	1.08	1.34	3.03	4.02	1.26	1.30	14°
0.866	M 22 x 1.5	M 22 x 1.5L	-	1.102	0.79	1.02	2.13	1.18	1.46	3.31	4.37	1.26	1.46	15°
0.984	M 24 x 2	M 24 x 2L	-	1.220	0.87	1.17	2.36	1.32	1.65	3.70	4.88	1.42	1.65	15°
1.181*	M 30 x 2	M 30 x 2L	-	1.457	0.98	1.37	2.76	1.57	2.01	4.33	5.71	1.61	2.01	17°

* Only available in type W

Build & Price

Selected Part

Part Number

Total (net)

US$16.72

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	US$16.72
50	99	US$15.33
100	249	US$13.94
≥ 250		US$12.54

Prop 65: -

Please contact our Sales Department for more information.

RoHS: -

No details on RoHS compatibility are available at this time. Please contact our Sales Department for more information.

Weight: 0.044 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 648.1 Rod End Bearings Steel, Tapped Type

Product description

Specification

On request

Part Options / Table

Type (Pairings)

Type (Pairings): N - Brass / steel, lubrication possible

Type (Pairings): W - Steel PTFE / steel, self lubricated

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 648.1 Rod End Bearings Steel, Tapped Type

Product description

Specification

On request

Part Options / Table

Type (Pairings)

Type (Pairings): N - Brass / steel, lubrication possible

Type (Pairings): W - Steel PTFE / steel, self lubricated

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Important: Price Adjustment Announcement