Breather strainers GN 7403 are used in enclosure and device construction. In an enclosure wall, they ensure pressure compensation between the enclosure interior and the outside.
Any possible dirt and dust particles carried by the medium, usually gas, are prevented from being exchanged, depending on the mesh size. This protects the inside of the device from contamination and also protects the environment from any exiting dust.
The outer diameter of the enclosures with recessed hex is chosen to match screw-in holes for tube connections according to DIN 3852.
The seal is embedded in a radial groove and can therefore not be lost or squeezed out during the tightening operation.
Assembly note:
For wall thicknesses below 4 mm, use thin hex nuts GN 7430.
Body
Stainless steelNI AISI 303
Strainer
Stainless steel mesh AISI 304
Strainer bezel
Plastic
Technopolymer (Polyamide PA)
Seal / O-ring
Rubber NBR (Perbunan®)
RoHS
Body in brass
Other mesh size
Other strainer material
| d1 Pipe thread | Fine thread | Mesh size in µm | d2 | d3 | l1 | l2 | s | |
|---|---|---|---|---|---|---|---|---|
| G 1/2 | M 20 x 1.5 | 3.94 | 19.69 | 1.02 | 0.39 | 0.33 | 0.30 | 0.91 |
| G 3/4 | M 26 x 1.5 | 3.94 | 19.69 | 1.26 | 0.55 | 0.35 | 0.31 | 1.18 |
| G 1 | M 33 x 1.5 | 3.94 | 19.69 | 1.57 | 0.79 | 0.43 | 0.33 | 1.42 |
| Min | Max | Price |
|---|---|---|
| 1 | 49 | $22.85 |
| 50 | 99 | $20.94 |
| 100 | 249 | $19.04 |
| ≥ 250 | $17.14 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
Attention Valued Customer,
Beginning June 15, 2024, we will implement a price adjustment. Some items will have a price decrease, while others will increase. The adjustment helps ensure our commitment to providing our customers with the best products and services.
We will honor current published prices through June 14, 2024.
Customers with pricing agreements will not be effected until annual pricing is reviewed.
Thank you
J.W. Winco
