Cam roller carriages GN 2494 can be combined with cam roller linear guide rails GN 2492 or cam rollers GN 2496 to assemble linear guide rail systems.
These space-saving units are used, for example, in the machine and jigs building industry, in transportation and building services equipment for supporting sliding doors, or to enable the linear movement of production and plant equipment. The materials can also be used in particularly aggressive environments that can be found, for example, in the chemical, pharmaceutical, medical or food processing industries.
Linear guide rail systems are generally installed in pairs, with a horizontal alignment, either vertically (as shown) or perpendicularly. During assembly, please take note of the small bores which indicate the load bearing side of the cam roller carriages. Wipers fitted to the guide rails on both ends of the cam roller carriages prevent dirt built-up.
The open-end wrench needed for assembly is included in the delivery.
Stainless steel AISI 316L
Stainless steel AISI 440C
Ball mounted, sealed (2RS)
Sealing washer, rubber (NBR), blue
Roller bearing grease, FDA compliant, class H1
Blue, FDA compliant
Operating temperature -4 °F to 212 °F
(-20 °C to 100 °C)
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.507 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351