GN 2404 telescopic linear slides with partial extension are used, for example, for drawers and sliding doors, or in jigmaking for a sliding motion in linear direction. Rail and runner are equal in length.
The one-sided sliding distance is limited to slightly more than half the rail length, which corresponds to a partial extension. For a full extension, the support screw can be removed, thus extending the stroke to slightly more than the complete rail length.
The limitation of the max. stroke should be ensured by external elements. The stops of the rail have been designed to guard against the inadvertent extraction of the runner from the rail.
Rail / runner
Zinc plated, blue passivated finish
Rolling bearing steel, hardened
Steel, zinc plated
Other lengths (based on the standard lengths in the grid dimension of 80 mm)
Special lengths (bore, start and end distances)
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.639 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351