You are here: Product Overview > 1.2 Operating by Using Machine and Device Handles > Ledge Handles > GN 430.1 Ledge Handles previous product next product

Because of a web page matching your requested link is no longer valid. You have been automatically redirected to the new link.

GN 430.1 Ledge Handles Aluminum Handle Profile, Plastic End Caps, with Lettering Block

Photo

Finish: EL - Anodized finish, natural color

GN 430.1 Aluminum Ledge Handles, Plastic End Caps, with Lettering Block Finish: SW - Black, RAL 9005, textured finish

Standard Sheet GN 430.1 Print This Page Operating Instruction GN 430.1 Assembly Instructions / Application Examples Plastic Characteristics Paper Strip Templates

Product description

Information

A typical field of application for ledge handles GN 430.1 are doors of protective enclosures on machines and devices. They are also suitable as drawer handles.

The screw channel for M6 screws allows any number of mounting screws at any position within the dimension l₂.

The aluminum profile is available in any length, and the end caps are also available individually. Special lengths can be delivered even in relatively small quantities.

For ledge handles GN 430.1 with lettering black, only one end cap is mounted when delivered, so that the supplied paper / film strip can be labeled and pushed into the groove provided.

A ZIP file with various templates (Word^®, Open Office, PDF) is provided at https://www.jwwinco.com/en-us/service/downloads/templates-for-gn-4301-1, which can be used to create labels. The paper strip also serves as a carrier for common lettering tapes up to 18 mm in width.

Specification

Handle profile
Aluminum

Powder coated
Black, RAL 9005, textured finishSW
Anodized finish, natural colorEL

End caps
Plastic, Polyamide (PA)
Black-gray

Lettering block
Insert groove supplied with:

Paper strip 200 g/m², 19.5 mm width
bright white, age-resistant
PVC hard film
Transparent

RoHS

On request

Special lengths
Single paper strips / film strips
Various inch and metric size fasteners

Technical drawing

GN 430.1 Aluminum Ledge Handles, Plastic End Caps, with Lettering Block sketch

Hide technical drawing

Part Options / Table

Part Number SW	Part Number EL	l₁	b₁	b₂	b₃	h₁	h₂	l₂ Screw area	l₃	t


430.1-110-SW	430.1-110-EL	4.33	1.42	0.51	0.31	1.34	0.94	2.60	0.87	0.47
430.1-130-SW	430.1-130-EL	5.12	1.42	0.51	0.31	1.34	0.94	3.39	0.87	0.47
430.1-150-SW	430.1-150-EL	5.91	1.42	0.51	0.31	1.34	0.94	4.17	0.87	0.47
430.1-200-SW	430.1-200-EL	7.87	1.42	0.51	0.31	1.34	0.94	6.14	0.87	0.47
430.1-250-SW	430.1-250-EL	9.84	1.42	0.51	0.31	1.34	0.94	8.11	0.87	0.47
430.1-300-SW	430.1-300-EL	11.81	1.42	0.51	0.31	1.34	0.94	10.08	0.87	0.47
430.1-400-SW	430.1-400-EL	15.75	1.42	0.51	0.31	1.34	0.94	14.02	0.87	0.47
430.1-500-SW	430.1-500-EL	19.69	1.42	0.51	0.31	1.34	0.94	17.95	0.87	0.47

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

l₁	b₁	b₂	b₃	h₁	h₂	l₂ Screw area	l₃	t

4.33	1.42	0.51	0.31	1.34	0.94	2.60	0.87	0.47
5.12	1.42	0.51	0.31	1.34	0.94	3.39	0.87	0.47
5.91	1.42	0.51	0.31	1.34	0.94	4.17	0.87	0.47
7.87	1.42	0.51	0.31	1.34	0.94	6.14	0.87	0.47
9.84	1.42	0.51	0.31	1.34	0.94	8.11	0.87	0.47
11.81	1.42	0.51	0.31	1.34	0.94	10.08	0.87	0.47
15.75	1.42	0.51	0.31	1.34	0.94	14.02	0.87	0.47
19.69	1.42	0.51	0.31	1.34	0.94	17.95	0.87	0.47

Build & Price

3D Product Configurator

Information on Mounting with a Screw Channel

Thanks to the screw channel running all the way through, any number of screws with standard thread M6 can be placed in any location within the screw area l₂. Please note the following guide values:

• Minimum screw-in depth: 0.39" (10 mm)
• Max. load per screw: 90 lbf (400 N)
• Max. tightening torque: 4 Nm

Application Examples

Information on GN 430.1 Ledge Handles with Lettering Block

A ZIP file with various templates (Word®, Open Office, PDF) is provided at www.jwwinco.com/service, which can be used to create labels. The paper strip also serves as a carrier for common lettering tapes up to 18 mm in width.

Selected Part

Part Number

Total US Dollars (net)

$12.34

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$12.34
100	249	$11.31
250	499	$10.28
≥ 500		$9.25

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.183 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.