Edge Handles GN 481

Product description

Information

Edge handles GN 481 are particularly compact and are used, for example, on the side of monitor housings as a handling aid or generally to protect the edges of housings.

Tolerance compensation of 1 mm per end cap simplifies installation. The two end caps are mounted to the handle profile with self-tapping countersunk screws so they can be screwed back on after adjusting the length of the handle without requiring readjustment. This allows the length of the housing to be adapted to any desired size.

Specification

Tube
Aluminum

Black, RAL 9005, textured finishSW
Anodized finish, natural colorEL

End pieces
Zinc die-cast
Powder coated
Black, RAL 9005, textured finish

Countersunk screws
Steel

Self-tapping, with internal Torx® drive
Black, zinc plated

RoHS

On request

Special lengths
Other finishes
Various metric size fasteners and kit packaging

Build & Price

Part Number	d₁ -0.02	l₁	a₁	a₂	d₂	h₁	h₂ -0.004	l₂

481-30-100-SW	1.18 -0.02	3.94	0.71	0.35	1.26	1.36	0.571 -0.004	4.17
481-30-100-EL	1.18 -0.02	3.94	0.71	0.35	1.26	1.36	0.571 -0.004	4.17
481-30-200-SW	1.18 -0.02	7.87	0.71	0.35	1.26	1.36	0.571 -0.004	8.11
481-30-200-EL	1.18 -0.02	7.87	0.71	0.35	1.26	1.36	0.571 -0.004	8.11
481-30-300-SW	1.18 -0.02	11.81	0.71	0.35	1.26	1.36	0.571 -0.004	12.05
481-30-300-EL	1.18 -0.02	11.81	0.71	0.35	1.26	1.36	0.571 -0.004	12.05
481-30-400-SW	1.18 -0.02	15.75	0.71	0.35	1.26	1.36	0.571 -0.004	15.98
481-30-400-EL	1.18 -0.02	15.75	0.71	0.35	1.26	1.36	0.571 -0.004	15.98
481-30-500-SW	1.18 -0.02	19.69	0.71	0.35	1.26	1.36	0.571 -0.004	19.92
481-30-500-EL	1.18 -0.02	19.69	0.71	0.35	1.26	1.36	0.571 -0.004	19.92

d₁ -0.02	l₁	a₁	a₂	d₂	h₁	h₂ -0.004	l₂

1.18	3.94	0.71	0.35	1.26	1.36	0.571	4.17
1.18	7.87	0.71	0.35	1.26	1.36	0.571	8.11
1.18	11.81	0.71	0.35	1.26	1.36	0.571	12.05
1.18	15.75	0.71	0.35	1.26	1.36	0.571	15.98
1.18	19.69	0.71	0.35	1.26	1.36	0.571	19.92

3D Product Configurator

Handle diameter d₁

1.18

Finish

EL - Anodized finish, natural color

SW - Black, RAL 9005, textured finish

Mounting Information

In order to align the edge handle with theedge of the cabinet (tolerance l₁ + 2 mm), the end caps should, to start with, only be loosely fitted.

The mounting is carried out in two steps as follows:

Fit the end caps firmly to the cabinet.
Fix the extrusion axially by using the countersunk screws.

Selected Part

Part Number

Total US Dollars (net)

$16.87

In Stock: 19

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$16.87
100	249	$15.47
250	499	$14.06
≥ 500		$12.65

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.209 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.