ELESA original design 
Two spoked handwheels EN 522.5 have an ergonomically shaped rim for a safer and more comfortable grip.
Suitable for use in corrosion free environments. Specifically, the FDA certified plastic materials allow the use in the food industry.
Resistant to solvents, oils, grease and other chemical agents.
Plastic, Polypropylene (PP)
Hub bushing
Stainless steel AISI 304
Molded-in
Cover
Stainless steel AISI 304
Self-adhesive
Revolving handles
RoHS
Other modifications such as special inch and metric bores, set screw holes, etc.
| B | Without keyway |
| K | With keyway |
| R | With revolving handle |
| d1 | d2 H7 | d3 | d4 | d5 | b | l1 | l2 | l3 | r | Ø Handle |
|---|---|---|---|---|---|---|---|---|---|---|
| 3.15 | 0.315 | 0.71 | 0.81 | 0.98 | 0.71 | 0.67 | 1.38 | 1.77 | 1.14 | 0.63 |
| 3.94 | 0.394 | 0.71 | 0.81 | 1.00 | 0.79 | 0.67 | 1.46 | 2.36 | 1.46 | 0.71 |
| 4.92 | 0.472 | 0.87 | 1.02 | 1.22 | 0.87 | 0.87 | 1.73 | 2.56 | 1.89 | 0.87 |
| 6.30 | 0.551 | 1.02 | 1.22 | 1.57 | 0.98 | 1.06 | 2.01 | 3.15 | 2.56 | 0.91 |
| 7.87 | 0.630 | 1.18 | 1.42 | 1.91 | 1.10 | 1.34 | 2.40 | 3.15 | 3.31 | 0.94 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 3 | $41.25 |
| 4 | 24 | $39.75 |
| 25 | 49 | $37.50 |
| ≥ 50 | $33.75 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
