Two spoked handwheels GN 322 are distinguished by modern design. The highly polished rim and the shot-blasted finish do not, for most applications, require painting or other surface treatments.
No mounting hole in rim for handwheel without handle. Handle shipped loose; mounting of handle is required.
Aluminum
Radial and axial runout of the rim < 0.4 mm
Wheel body
Unmachined, shot-blasted finish
Stepped cylindrical revolving handle GN 798
Plastic
Technopolymer
RoHS
Other modifications such as special inch and metric bores, keyways, set screw holes, etc.
| B | Without keyway |
| A | Without revolving handle |
| R | With revolving handle |
| d1 | d2 +0.001 Bore | d3 | b | l1 | l2 | l3 | r | Ø Handle GN 798 |
|
|---|---|---|---|---|---|---|---|---|---|
| 4.92 | 1/2 | - | 1.22 | 0.59 | 0.71 | 1.30 | 2.42 | 2.13 | 0.87 |
| 5.51 | 5/8 | - | 1.42 | 0.65 | 0.75 | 1.42 | 3.01 | 2.40 | 0.94 |
| 6.30 | 1/2 | 5/8 | 1.42 | 0.71 | 0.79 | 1.54 | 3.01 | 2.80 | 0.94 |
| 7.87 | 5/8 | 3/4 | 1.65 | 0.81 | 0.94 | 1.77 | 3.41 | 3.50 | 0.98 |
| 9.84 | 3/4 | - | 1.89 | 0.91 | 1.10 | 2.01 | 3.41 | 4.45 | 0.98 |
| d1 | d2 +0.001 Bore | d3 | b | l1 | l2 | l3 | r | Ø Handle GN 798 |
|
|---|---|---|---|---|---|---|---|---|---|
| 4.92 | 12 | 14 | 1.22 | 0.59 | 0.71 | 1.30 | 2.42 | 2.13 | 0.87 |
| 5.51 | 14 | 16 | 1.42 | 0.65 | 0.75 | 1.42 | 3.01 | 2.40 | 0.94 |
| 6.30 | 14 | 16 | 1.42 | 0.71 | 0.79 | 1.54 | 3.01 | 2.80 | 0.94 |
| 7.87 | 18 | 20 | 1.65 | 0.81 | 0.94 | 1.77 | 3.41 | 3.50 | 0.98 |
| 9.84 | 22 | 26 | 1.89 | 0.91 | 1.10 | 2.01 | 3.41 | 4.45 | 0.98 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 49 | $52.16 |
| 50 | 99 | $47.82 |
| 100 | 249 | $43.47 |
| ≥ 250 | $39.12 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
