Spoked handwheels GN 950.1 are available in types F and D with fixed or revolving handle.
Spoked handwheels GN 950.1 have extended hubs with larger diameters, allowing for larger bores and an increased distance between the wheel rim and the fastening surface.
Cast ironGG
Contact face of hub machined
Rim turned and highly polished finish
Handles DIN 39 / DIN 98
Steel, zinc plated, blue passivated
Radial and axial runout of the rim < 0.4 mm
RoHS
Other modifications such as special inch and metric bores, set screw holes, etc.
| B | Without keyway |
| K | With keyway |
| A | Without handle |
| D | With revolving handle |
| d1 | d2 +0.001 Bore | d3 | b | l1 | l2 ≈ | l3 ≈ | r | Ø Handle | No. of spokes |
|---|---|---|---|---|---|---|---|---|---|
| 4.92 | 14 | 1.34 | 0.63 | 1.02 | 1.77 | 2.56 | 1.85 | 0.79 | 3 |
| 6.30 | 16 | 1.77 | 0.71 | 1.26 | 2.05 | 3.15 | 2.44 | 0.98 | 3 |
| 7.87 | 20 | 1.97 | 0.87 | 1.50 | 2.32 | 3.15 | 3.15 | 0.98 | 3 |
| 9.84 | 24 | 2.20 | 1.02 | 1.73 | 2.60 | 4.02 | 3.98 | 1.26 | 5 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 49 | $66.26 |
| 50 | 99 | $60.74 |
| 100 | 249 | $55.22 |
| ≥ 250 | $49.69 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
