Star Knobs GN 5336

Product description

Information

Star knobs GN 5336 are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

Casting flash is eliminated through high quality production techniques.

Original ELESA design, now produced in metal in agreement with ELESA S.p.A.

Specification

Aluminum

Matte, tumbled finishMT
Flash mark not visible
Polished finishPL
(only available in metric sizes)

RoHS

On request

Special threads, bores, or threaded studs in matte finish only
Other modifications such as cross holes and set screw holes

Build & Price

Part Number E - With tapped blind bore	Part Number C - With plain blind bore, tol. H7	Part Number D - With tapped through bore	d₁	d₂ Thread Type E	Type D / Type E	d₃ +0.001 Bore Type C	d₄ +0.02	h₁	h₂ ≈	t₁ min.

3TC50/EMT			1.57	1/4 x 20	-	0.55 +0.02	0.98	0.49	0.59	0.51
5TC50/EMT			1.57	5/16 x 18	-	0.55 +0.02	0.98	0.49	0.59	0.51
5TC51/EMT			1.97	5/16 x 18	-	0.71 +0.02	1.26	0.63	0.71	0.63
6TC51/EMT			1.97	3/8 x 16	-	0.71 +0.02	1.26	0.63	0.71	0.63
6TC52/EMT			2.36	3/8 x 16	-	0.79 +0.02	1.57	0.79	0.87	0.79
8TC52/EMT			2.36	1/2 x 13	-	0.79 +0.02	1.57	0.79	0.87	0.79
8TC53/EMT			2.76	1/2 x 13	-	0.98 +0.02	1.81	0.91	1.10	0.79
10TC53/EMT			2.76	5/8 x 11	-	0.98 +0.02	1.81	0.91	1.10	0.79
	8MC50/CMT		1.57	-	B 8 +0.001	0.55 +0.02	0.98	0.49	0.59	0.51
6NC50/EMT			1.57	M 6	-	0.55 +0.02	0.98	0.49	0.59	0.51
8NC50/EMT		8NC50/DMT	1.57	M 8	-	0.55 +0.02	0.98	0.49	0.59	0.51
	10MC51/CMT		1.97	-	B 10 +0.001	0.71 +0.02	1.26	0.63	0.71	0.63
8NC51/EMT			1.97	M 8	-	0.71 +0.02	1.26	0.63	0.71	0.63
10NC51/EMT		10NC51/DMT	1.97	M 10	-	0.71 +0.02	1.26	0.63	0.71	0.63
	12MC52/CMT		2.36	-	B 12 +0.001	0.79 +0.02	1.57	0.79	0.87	0.79
10NC52/EMT			2.36	M 10	-	0.79 +0.02	1.57	0.79	0.87	0.79
12NC52/EMT		12NC52/DMT	2.36	M 12	-	0.79 +0.02	1.57	0.79	0.87	0.79
	16MC53/CMT		2.76	-	B 16 +0.001	0.98 +0.02	1.81	0.91	1.10	0.79
12NC53/EMT			2.76	M 12	-	0.98 +0.02	1.81	0.91	1.10	0.79
16NC53/EMT		16NC53/DMT	2.76	M 16	-	0.98 +0.02	1.81	0.91	1.10	0.79

Part Number C - With plain blind bore, tol. H7	Part Number E - With tapped blind bore	Part Number D - With tapped through bore	d₁	d₂ Thread Type E	Type D / Type E	d₃ +0.001 Bore Type C	d₄ +0.02	h₁	h₂ ≈	t₁ min.

8MC50/CPO			1.57	-	B 8 +0.001	0.55 +0.02	0.98	0.49	0.59	0.51
	6NC50/EPO		1.57	M 6	-	0.55 +0.02	0.98	0.49	0.59	0.51
	8NC50/EPO	8NC50/DPO	1.57	M 8	-	0.55 +0.02	0.98	0.49	0.59	0.51
10MC51/CPO			1.97	-	B 10 +0.001	0.71 +0.02	1.26	0.63	0.71	0.63
	8NC51/EPO		1.97	M 8	-	0.71 +0.02	1.26	0.63	0.71	0.63
	10NC51/EPO	10NC51/DPO	1.97	M 10	-	0.71 +0.02	1.26	0.63	0.71	0.63
12MC52/CPO			2.36	-	B 12 +0.001	0.79 +0.02	1.57	0.79	0.87	0.79
	10NC52/EPO		2.36	M 10	-	0.79 +0.02	1.57	0.79	0.87	0.79
	12NC52/EPO	12NC52/DPO	2.36	M 12	-	0.79 +0.02	1.57	0.79	0.87	0.79
16MC53/CPO			2.76	-	B 16 +0.001	0.98 +0.02	1.81	0.91	1.10	0.79
	12NC53/EPO		2.76	M 12	-	0.98 +0.02	1.81	0.91	1.10	0.79
	16NC53/EPO	5336-70-M16-D-PL	2.76	M 16	-	0.98 +0.02	1.81	0.91	1.10	0.79

d₁	d₂ Thread Type E	Type D / Type E	d₃ +0.001 Bore Type C	d₄ +0.02	h₁	h₂ ≈	t₁ min.	t₂

1.57	1/4 x 20	5/16 x 18	-	-	0.55	0.98	0.49	0.59	0.51
1.97	5/16 x 18	3/8 x 16	-	-	0.71	1.26	0.63	0.71	0.63
2.36	3/8 x 16	1/2 x 13	-	-	0.79	1.57	0.79	0.87	0.79
2.76	1/2 x 13	5/8 x 11	-	-	0.98	1.81	0.91	1.10	0.79

d₁	d₂ Thread Type E	Type D / Type E	d₃ +0.001 Bore Type C	d₄ +0.02	h₁	h₂ ≈	t₁ min.	t₂

1.57	M 6	M 8	B 8	0.55	0.98	0.49	0.59	0.51
1.97	M 8	M 10	B 10	0.71	1.26	0.63	0.71	0.63
2.36	M 10	M 12	B 12	0.79	1.57	0.79	0.87	0.79
2.76	M 12	M 16	B 16	0.98	1.81	0.91	1.10	0.79

3D Product Configurator

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total US Dollars (net)

$7.76

In Stock: 257

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$7.76
100	249	$7.11
250	499	$6.47
≥ 500		$5.82

Prop 65: Compliant

www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.070 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.