Vertical Acting Toggle Clamps GN 810.10

Type: A - Clamping bar with slotted hole

Operating Principle Toggle Lever / Overview of Toggle Clamp Types

Product description

Vertical acting toggle clamps „Longlife“ GN 810.10 can accommodate an application-specific screw or spindle assembly.

Vertical acting toggle clamps GN 810.10 are an advance development of GN 810. The steel sheet design of the clamp and lever arms is replaced by precision or die-forged components. The remaining steel sheet parts have been reinforced, bearing pins and rivets are hardened and ground.

Therefore these clamps are suitable for applications in which substantial forces occur and a long service life is required.

During extensive testing, with trouble free function and under load, the clamp has withstood over one million opening and closing cycles.

Flanged washers are included, toggle clamp spindle assemblies are not included.

Specification

Tensioning mechanism
Steel

Lever arm
Steel precision casting, blackened finish
Clamping arm
Forged, blackened finish
Sheet metal parts
Case hardening steel, blackened finish
Bearing pin / Bearing rivet
Hardened / ground
Moving parts lubricated with special grease

Flanged washers GN 898.1 for type A
Steel, zinc plated, blue passivated finish

Handle
Plastic
Red, oil resistant

RoHS

Accessory

GN 804 Toggle Clamp Spindle Assemblies
GN 807 Toggle Clamp Spindle Assemblies
GN 708.1 Toggle Clamp Spindle Assemblies (with rubber pressure pad)
GN 802 Toggle Clamp Spindle Assemblies
GN 903 Toggle Clamp Spindle Assemblies

Your Contact

You are looking for a Winco partner near you?

Part Number	Size	F_H Holding capacity	a	b₁	b₂	b₃	d₁	d₂	d₃	h₁	h₂	h₃	h₄ ≈

810.10-220-A	220	495 lbf (2200 N)	1.26	1.42	1.89	0.24	M 6	0.26	0.26	5.37	1.18	0.63	1.06
810.10-220-E	220	495 lbf (2200 N)	1.26	1.42	1.89	0.24	M 6	0.26	0.26	5.37	1.18	0.63	1.06
810.10-440-A	440	989 lbf (4400 N)	1.34	2.13	2.56	0.39	M 10	0.33	0.41	8.46	1.97	0.94	1.77
810.10-440-E	440	989 lbf (4400 N)	1.34	2.13	2.56	0.39	M 10	0.33	0.41	8.46	1.97	0.94	1.77
810.10-850-E	850*	1911 lbf (8500 N)	-	2.95	2.95	-	M 12	0.41	0.49	11.02	2.64	1.18	-
810.10-1540-E	1540*	3462 lbf (15400 N)	-	3.54	3.94	-	M 16	0.49	0.65	12.99	3.01	1.38	-

Size	l₁ Type A	Type E	l₂	l₃	m₁	m₂	m₃	r₁	r₂	s₁	s₂

220	3.58	3.39	2.01	1.81	0.79	1.26	0.31	3.03	2.83	0.14	0.24
220	3.58	3.39	2.01	1.81	0.79	1.26	0.31	3.03	2.83	0.14	0.24
440	5.10	5.10	2.60	2.60	1.18	1.77	0.47	4.21	4.21	0.20	0.39
440	5.10	5.10	2.60	2.60	1.18	1.77	0.47	4.21	4.21	0.20	0.39
850*	-	6.34	-	2.83	2.17	2.17	0.39	-	5.24	0.24	0.47
1540*	-	7.99	-	3.64	2.56	2.56	0.49	-	6.57	0.31	0.63

Size	F_H Holding capacity	a	b₁	b₂	b₃	d₁	d₂	d₃	h₁	h₂	h₃	h₄ ≈

220	495 lbf (2200 N)	1.26	1.42	1.89	0.24	M 6	0.26	0.26	5.37	1.18	0.63	1.06
440	989 lbf (4400 N)	1.34	2.13	2.56	0.39	M 10	0.33	0.41	8.46	1.97	0.94	1.77
850*	1911 lbf (8500 N)	-	2.95	2.95	-	M 12	0.41	0.49	11.02	2.64	1.18	-
1540*	3462 lbf (15400 N)	-	3.54	3.94	-	M 16	0.49	0.65	12.99	3.01	1.38	-

Size	l₁ Type A	Type E	l₂	l₃	m₁	m₂	m₃	r₁	r₂	s₁	s₂

220	3.58	3.39	2.01	1.81	0.79	1.26	0.31	3.03	2.83	0.14	0.24
440	5.10	5.10	2.60	2.60	1.18	1.77	0.47	4.21	4.21	0.20	0.39
850*	-	6.34	-	2.83	2.17	2.17	0.39	-	5.24	0.24	0.47
1540*	-	7.99	-	3.64	2.56	2.56	0.49	-	6.57	0.31	0.63