Horizontal acting toggle clamps GN 820.2 work according to the toggle principle: lever and clamping bar move in the opposite direction.
They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position. The 90° rotated mounting surface allows a space-saving installation in addition to the clamping point.
Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type MF) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type MFC.
Case-hardened Steel C10
Zinc plated, blue passivated finish
Tempered bearing pins
Case-hardened bearing rivets (for size 355 and up)
All moving parts lubricated with special grease
High quality, oil resistant red plastic
Spindle assembly GN 708.1,
Steel, zinc plated, blue passivated finish
Rubber tip 85 Shore A
Clamp mounts GN 801 (for type MF)
Clamping arm extenders GN 801.1 (for type MF)
Clamping arm extenders GN 801.2 (for type MF)
Hide technical drawing
Part Options / Table
U-bar version, with two flanged washers
U-bar version, with two flanged washers and GN 708.1 spindle assembly
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.231 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351