ELESA original design 
Split shaft collars EN 707.5 have been designed for mounting in a radial direction on round cross-sections such as shafts or axles and are used as an end stop. They can easily be assembled via the clamping screw, whereby the surface is particularly protected by the plastic.
When used with stainless steel screws and nuts, the plastic elements of these shaft collars are particularly suitable for use in corrosive conditions.
Due to the material used, their mass inertia is very low.
Body
Plastic
Technopolymer (Polyamide PA)
Socket cap screw DIN 912
Stainless steel AISI 316L
Hex nut DIN 934
Stainless steel AISI 316L
RoHS
| d1 | d2 | b | d3 | x ≈ Max. protrusion of screw head | Max. recommended tightening torque in Nm |
||
|---|---|---|---|---|---|---|---|
| 1.38 | B 12 | B 14 | B 16 | 0.51 | M 4 | 0.04 | 2 |
| 1.57 | B 18 | B 20 | - | 0.55 | M 4 | 0.03 | 2 |
| 1.97 | B 22 | B 25 | B 30 | 0.55 | M 5 | 0.09 | 3 |
| 2.56 | B 35 | B 40 | - | 0.55 | M 5 | 0.01 | 3 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | $4.70 |
| 10 | 249 | $4.53 |
| 250 | 499 | $4.28 |
| ≥ 500 | $3.85 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351