Door cam latches GN 119 lock by a turning operation clockwise (right), which moves the cam latch into the locked position behind the door frame.
The latches have a pulling-in range of 10 mm so that they can also be used together with seals, for example.
Thanks to the stainless steel material, the latches are optimally suited for use in corrosive environments.
The various operating bolts and distance pieces allow for a clamping range A1...A9 from 17 to 65 mm.
Cam latch housing / operating bolt
Stainless steelNI AISI 303
Latch arm
Stainless steel AISI 304
Spacer
Stainless steel AISI 303
Star knob GN 5334
Stainless steel AISI 304
Protection class IP 65
RoHS
| SG | With hand knob |
| DK | With triangular spindle |
| VK7 | With square spindle |
| VK8 | With square spindle |
| VDE | With double bit |
| Clamping range A1 - A9 (Door thickness + frame thickness) (millimeters) | ||||||||
|---|---|---|---|---|---|---|---|---|
| A 1 (l=35) | A 2 (l=40) | A 3 (l=45) | A 4 (l=50) | A 5 (l=55) | A 6 (l=60) | A 7 (l=65) | A 8 (l=70) | A 9 (l=75) |
| 17 - 25 | 22 - 30 | 27 - 35 | 32 - 40 | 37 - 45 | 42 - 50 | 47 - 55 | 52 - 60 | 57 - 65 |
|
By turning the cam latch clockwise, the stepped latch arm moves up behind the door frame and pulls the door in. The large draw-in range of 10 mm allows these latches to be used successfully on doors with sealing strips. When selecting clamping range A, the width of the door seal might have to be taken into consideration. To fit the latch, the door will have to be provided with a hole as per sketch shown at a distance from the door frame to hole center of 23 mm. The cam latch housing with the preassembled operating bolt is inserted into the hole from the front and held in position with the hexagon nut. The spacer and the cam latch arm are then installed from the backside and assembled together with the hex nut. The installation bore in the door leaf is usually generated by punching or laser machining during a mass production run. The installation bore can also be created by drilling / milling as shown in the outline drawings. For small production runs and steel sheets below 2 mm thickness, Sheet Metal Punches GN 123 are the tool of choice. |
||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 99 | $56.51 |
| 100 | 249 | $51.80 |
| 250 | 499 | $47.09 |
| ≥ 500 | $42.38 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
Attention Valued Customer,
Beginning June 15, 2024, we will implement a price adjustment. Some items will have a price decrease, while others will increase. The adjustment helps ensure our commitment to providing our customers with the best products and services.
We will honor current published prices through June 14, 2024.
Customers with pricing agreements will not be effected until annual pricing is reviewed.
Thank you
J.W. Winco
