ELESA original design
EN 239.8 flat mounting plates allow the installation of EN 239.6- and 239.7-60-110 hinges if the required spacing of the installation bore holes differs from the spacing of the hinge.
Their use is necessary if the unit is to be mounted on profile systems.
The required quantity of the mounting plates must be ordered depending on the desired installation spacing m3.
Two nuts and the appropriate countersunk screws are included.
RoHS compliant
| l1 | m3 | a Profile cross section | b | d For screw | l2 For EN 239.6 (with switch) | For EN 239.7* (without switch) | m1 | m2 | m4 |
|---|---|---|---|---|---|---|---|---|---|
| 4.33 | 0.55 | 1.18 | 1.10 | M 6 | 0.47 | 0.55 | 0.75 | 3.58 | 2.87 |
| 4.33 | 0.65 | 1.38 | 1.10 | M 6 | 0.47 | 0.55 | 0.75 | 3.58 | 2.83 |
| 4.33 | 0.75 | 1.57 | 1.10 | M 6 | 0.47 | 0.55 | 0.75 | 3.58 | 2.78 |
| 4.33 | 0.83 | 1.77 | 1.34 | M 6 | 0.47 | 0.55 | 0.75 | 3.58 | 2.72 |
| 4.33 | 0.94 | 1.97 | 1.34 | M 6 | 0.47 | 0.55 | 0.75 | 3.58 | 2.72 |
| Min | Max | Price |
|---|---|---|
| 1 | 3 | $11.42 |
| 4 | 24 | $11.00 |
| 25 | 49 | $10.38 |
| ≥ 50 | $9.34 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
