L | Fixing angle piece left |
R | Fixing angle piece right |
l1 | d | h1 | h2 | h3 | l2 | l3 | l4 | l5 | l6 | l7 | l8 | l9 | m1 | m2 | r | s | x | y |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.57 | 0.21 | 0.30 | 1.10 | 0.10 | 1.02 | 1.42 | 2.76 | 4.14 | 2.93 | 1.08 | 4.01 | 0.63 | 0.98 | 0.20 | 3.09 | 0.16 | 0.51 | 1.16 |
1.97 | 0.26 | 0.39 | 1.38 | 0.10 | 1.38 | 1.81 | 3.63 | 5.51 | 4.05 | 1.55 | 5.30 | 1.09 | 1.18 | 0.24 | 4.13 | 0.20 | 0.71 | 1.50 |
2.36 | 0.33 | 0.49 | 1.57 | 0.10 | 1.57 | 2.40 | 4.59 | 7.07 | 4.93 | 2.02 | 6.78 | 1.46 | 1.42 | 0.31 | 5.41 | 0.20 | 0.75 | 1.85 |
|
|
The stainless steel multiple-joint hinges can be adjusted in three planes during installation. For example, this allows adjustment for tolerances or establishing of required compression forces for seals. |
Flaps, hatches and doors can be inset, surface-mounted or mitered. The maximum wall thicknesses and bend sizes for planned sheet metal constructions arise from the respective installation type. |
||||||||||||||||||||||||||||||||||||||||||||||
1. Fixing angle pieces mounted to the housing with slotted holes perpendicular to the hinge axis: |
||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||
Show / Hide columns
|
||||||||||||||||||||||||||||||||||||||||||||||
2. Fixing angle pieces mounted to the housing with slotted holes parallel to the hinge axis: |
||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||
Show / Hide columns
|
||||||||||||||||||||||||||||||||||||||||||||||
The design variants shown represent standard installation conditions. If the installation position of the hinge is changed or one of the two wall thickness dimensions s or b are lower, the maximum achievable dimensions change independently of each other. This makes it possible in some cases to work with larger wall thickness dimensions than those specified with the same hinge size. A simple design check via CAD or a test setup is therefore recommended. |
|
The maximum load of the Stainless Steel-Multiple-joint hinges specified below applies to the standard use cases and serves for orientation in the case of deviating applications. The resulting forces lead to slight elastic deformation, which can be compensated for by means of the adjustment options, if necessary. |
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
Show / Hide columns
|
Min | Max | Price |
---|---|---|
1 | 9 | $103.22 |
10 | 24 | $94.62 |
25 | 49 | $86.02 |
≥ 50 | $77.42 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.
Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.
For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.
You will not be redirected automatically. Please click on the link below.