With GN 900.3 connecting sets, two GN 900 adjustable slide units can be connected to create an X-Z axis configuration.
The assembly is done via two connection plates that eliminate the use of any kind of mounting holes in the slide. At the same time, the adjustable slide unit of the Z-axis can be moved within a limited range (vertically to the Z-axis).
For a slide configuration of the Z-axis parallel to the reference axis (type P), an adaptor plate (including a fastening unit, a small fixing plate, and socket cap screws) is required, which is included in the delivery.
The small fixing plate serves for the 90° alignment of the Z-axis and the adjustment of the adaptor plate (type P).
All parts required for mounting are included.
Anodized finish, natural color
Set screws DIN 913
Steel, zinc plated
Socket cap screws DIN 912
Hide technical drawing
Part Options / Table
Assembly of the Z-axis via connection plate and adaptor plate
Direct assembly of the Z-axis via connection plate
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.103 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351