The cart is empty.

English Español Français

Products

Service

Company

Technical

You are here: Product Overview > 1.1 Operating with Handles and Knobs > Knobs > EN 519 Cylindrical Handles previous product next product

EN 519 Cylindrical Handles Phenolic Plastic, with Molded-In Thread

Photo

ELESA original design
code: I.280

Standard Sheet EN 519 Print This Page Plastic Characteristics

Product description

Information

When using EN 519 cylindrical handles, the threaded portion of the shaft must be long enough so it seats completely in the handle otherwise, the plastic itself could fail under excessive stress.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Plastic
Duroplast (Phenolic PF)

Temperature resistant up to 230 °F (110 °C)
Black, shiny finish
Molded-in thread

RoHS compliant

Technical drawing

EN 519 Phenolic Plastic Cylindrical Handles, with Molded-In Thread sketch

Hide technical drawing

Part Options / Table

Part Number	d₁	d₂ Thread	d₃	l₁	l₂ min.	l₃ ±0.019

5NGM0	0.55	M 5	0.43	1.10	0.47	0.06
6NGM1	0.71	M 6	0.59	1.57	0.98	0.14
8NGM1	0.71	M 8	0.59	1.57	0.98	0.14
6NGM2	0.83	M 6	0.67	1.97	0.98	0.14
8NGM2	0.83	M 8	0.67	1.97	1.38	0.30
8NGM3	0.91	M 8	0.75	2.56	1.18	0.30
10NGM3	0.91	M 10	0.75	2.56	1.57	0.30
519-26-M8	1.02	M 8	0.83	3.15	1.77	0.28
10NGM4	1.02	M 10	0.83	3.15	2.17	0.28
12NGM4	1.02	M 12	0.83	3.15	2.17	0.39
519-28-M8	1.10	M 8	0.87	3.54	1.77	0.28
10NGM5	1.10	M 10	0.87	3.54	2.17	0.28
12NGM5	1.10	M 12	0.87	3.54	2.28	0.31
12NGM6	1.14	M 12	0.91	4.57	2.28	0.31
12NGM7	1.22	M 12	0.98	4.02	2.28	0.31
3TGM1	0.71	1/4 x 20	0.59	1.57	0.98	0.14
5TGM2	0.83	5/16 x 18	0.67	1.97	1.38	0.30
6TGM3	0.91	3/8 x 16	0.75	2.56	1.57	0.30
6TGM4	1.02	3/8 x 16	0.83	3.15	2.17	0.28
8TGM5	1.10	1/2 x 13	0.87	3.54	2.28	0.31

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	d₂ Thread	d₃	l₁	l₂ min.	l₃ ±0.019

0.71	1/4 x 20	0.59	1.57	0.98	0.14
0.83	5/16 x 18	0.67	1.97	1.38	0.30
0.91	3/8 x 16	0.75	2.56	1.57	0.30
1.02	3/8 x 16	0.83	3.15	2.17	0.28
1.10	1/2 x 13	0.87	3.54	2.28	0.31

Show / Hide columns

Metric

Dimensions in: Inch | Metric

d₁	d₂ Thread	d₃	l₁	l₂ min.	l₃ ±0.019

0.55	M 5	0.43	1.10	0.47	0.06
0.71	M 6	0.59	1.57	0.98	0.14
0.71	M 8	0.59	1.57	0.98	0.14
0.83	M 6	0.67	1.97	0.98	0.14
0.83	M 8	0.67	1.97	1.38	0.30
0.91	M 8	0.75	2.56	1.18	0.30
0.91	M 10	0.75	2.56	1.57	0.30
1.02	M 8	0.83	3.15	1.77	0.28
1.02	M 10	0.83	3.15	2.17	0.28
1.02	M 12	0.83	3.15	2.17	0.39
1.10	M 8	0.87	3.54	1.77	0.28
1.10	M 10	0.87	3.54	2.17	0.28
1.10	M 12	0.87	3.54	2.28	0.31
1.14	M 12	0.91	4.57	2.28	0.31
1.22	M 12	0.98	4.02	2.28	0.31