Indexing Levers GN 215

Product description

Information

With indexing levers GN 215, shafts can be turned through a predetermined angle and positively locked to index
lift the lever against spring pressure from serrations (one hand control).

Available with or without serrations. Version with 30 serrations has 12° angle per serration.

Limiting the indexing angle can be achieved with two dowels, see above drawing.

The bushing is connected to the shaft via a keyway.

The location flange is bolted to the machine with two socket cap screws DIN 912-M5.

The lever via location pins, provides the connection between shaft and location flange.

The serrations are protected from debris by the cover. This cover can be inserted by hand
(elastic segments engage into a groove) and removed with a screwdriver.

Specification

Body
Steel, blackened finish

Cover
Plastic, black with affixed PVC cover disk

Keyway for bore
K10: 3 P9 x 1.1
K12 - K16: DIN 6885 Page 2

Ball knob DIN 319
Plastic
Duroplast (Phenolic PF)
Black, shiny finish

Ball Knobs DIN 319

RoHS

On request

Serrations, restricted angle to drawing

Build & Price

Part Number A - Without serrations	Part Number B - With 30 serrations	d₁	d₂ H7 Bore with keyway	d₃	d₄	d₅	h₁	h₂	h₃ Max. shaft length	k	Length l	w +0.5°


10KF67/A	10KF67/B	2.13	K 10 H7	1.26	0.20	1.75	1.46	0.51	0.65	1.18	4.80	22° +0.5°
12KF67/A	12KF67/B	2.13	K 12 H7	1.26	0.20	1.75	1.46	0.51	0.65	1.18	4.80	22° +0.5°
14KF68/A	14KF68/B	2.36	K 14 H7	1.26	0.20	1.97	1.54	0.59	0.73	1.42	4.92	19° +0.5°
16KF68/A	16KF68/B	2.36	K 16 H7	1.26	0.20	1.97	1.54	0.59	0.73	1.42	4.92	19° +0.5°

d₁	d₂ H7 Bore with keyway	d₃	d₄	d₅	h₁	h₂	h₃ Max. shaft length	k	Length l	w +0.5°

2.13	K 10	K 12	1.26	0.20	1.75	1.46	0.51	0.65	1.18	4.80	22°
2.36	K 14	K 16	1.26	0.20	1.97	1.54	0.59	0.73	1.42	4.92	19°

3D Product Configurator

Outside diameter d₁

2.13

2.36

Bore d₂

K 10

K 12

K 14

K 16

Type

A - Without serrations

B - With 30 serrations

Technical and Assembly Instructions

The location pin is a wedge-type as standard, which guarantees backlash-free positioning and also achieving easy engagement and disengagement.

If backlash-free positioning is not required, a dowel pin (made from a set screw) can be used. The serrations can be made square or with dowels and suitable holes. Such holes have to be made large enough to ensure that the dowel is not restricted on engagement (lever swivel radius).

Smallest available angle for special serrations:

Size 54: 11°

Size 60: 9°

Smaller angles can be achieved with suitable serrations and dowels.

Selected Part

Part Number

Total US Dollars (net)

$127.16

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	24	$127.16
25	49	$116.57
50	99	$105.97
≥ 100		$95.37

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 1.014 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.