EN 512 Technopolymer Plastic Control Levers, with Round or Square Through Bore, or Keyway

Part Number	d₁	d₂ Bore +0.001 Square +0.002	d₃	d₄	d₅	d₆	h₁	h₂ -0.008	h₃ +0.02	h₄	Length l	k	r	s	w

8MED0	1.46	0.315 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-K8	1.46	0.315 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-V8	1.46	0.315 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-B10	1.46	0.394 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-K10	1.46	0.394 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-V10	1.46	0.394 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-B12	1.46	0.472 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-K12	1.46	0.472 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
512-37-V12	1.46	0.472 +0.001 / +0.002	0.71	0.83	0.39	0.20	0.79	0.020 -0.008	0.70 +0.02	1.81	3.19	1.02	0.54	0.17	25°
8MED1	1.77	0.315 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-K8	1.77	0.315 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-V8	1.77	0.315 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-B12	1.77	0.472 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-K12	1.77	0.472 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-V12	1.77	0.472 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-B15	1.77	0.591 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-K15	1.77	0.591 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
512-45-V15	1.77	0.591 +0.001 / +0.002	0.87	0.98	0.39	0.24	0.98	0.020 -0.008	0.90 +0.02	2.05	4.25	1.26	0.69	0.28	20°
10MED2	2.13	0.394 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-K10	2.13	0.394 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-V10	2.13	0.394 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-B14	2.13	0.551 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-K14	2.13	0.551 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-V14	2.13	0.551 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-B18	2.13	0.709 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-K18	2.13	0.709 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
512-54-V18	2.13	0.709 +0.001 / +0.002	1.02	1.22	0.47	0.31	1.18	0.020 -0.008	1.09 +0.02	2.40	5.00	1.54	0.80	0.29	20°
18MED3	2.95	0.709 +0.001 / +0.002	1.18	1.65	0.55	0.39	1.50	0.020 -0.008	1.37 +0.02	3.15	6.69	2.17	1.02	0.59	20°
512-75-K18	2.95	0.709 +0.001 / +0.002	1.18	1.65	0.55	0.39	1.50	0.020 -0.008	1.37 +0.02	3.15	6.69	2.17	1.02	0.59	20°
512-75-V18	2.95	0.709 +0.001 / +0.002	1.18	1.65	0.55	0.39	1.50	0.020 -0.008	1.37 +0.02	3.15	6.69	2.17	1.02	0.59	20°

d₁	d₂ Bore +0.001 Square +0.002	d₃	d₄	d₅	d₆	h₁	h₂ -0.008	h₃ +0.02	h₄	Length l	k	r	s	w

1.46	0.315	0.394	0.472	0.71	0.83	0.39	0.20	0.79	0.020	0.70	1.81	3.19	1.02	0.54	0.17	25°
1.77	0.315	0.472	0.591	0.87	0.98	0.39	0.24	0.98	0.020	0.90	2.05	4.25	1.26	0.69	0.28	20°
2.13	0.394	0.551	0.709	1.02	1.22	0.47	0.31	1.18	0.020	1.09	2.40	5.00	1.54	0.80	0.29	20°
2.95	0.709	-	-	1.18	1.65	0.55	0.39	1.50	0.020	1.37	3.15	6.69	2.17	1.02	0.59	20°

Assembly Examples

EN 512 control lever attached via a key / keyway, using Countersunk Washers GN 184.

EN 512 control lever with ball and spring mechanism for indexing the positioning angle, attached with a cross pin. The cross pin is to be attached at an angle of 45° to the shaft axis. These parts are not included and must be ordered separately.

EN 512 control lever in special design, without steel hub with injected blind hole and driver surface. This model is a very reasonably priced solution.

Selected Part

Part Number

Total US Dollars (net)

$25.75

In Stock: 10

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	9	$25.75
10	249	$24.81
250	499	$23.41
≥ 500		$21.07

Prop 65: -

Please contact our Sales Department for more information.

RoHS: -

No details on RoHS compatibility are available at this time. Please contact our Sales Department for more information.

Weight: 0.168 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

EN 512 Control Levers Technopolymer Plastic, with Round or Square Through Bore, or Keyway

Photo

Product description

Information

Specification

On request

Technical drawing

Part Options / Table

Bore code

Metric

Build & Price

Assembly Examples

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

B	Without keyway
K	With keyway
V	With square

EN 512 Control Levers Technopolymer Plastic, with Round or Square Through Bore, or Keyway

Photo

Product description

Information

Specification

On request

Technical drawing

Part Options / Table

Bore code

Metric

Build & Price

Assembly Examples

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Important: Pricing Adjustment