The outside rim of diamond cut knurled knobs EN 534 has been designed with a truncated diamond knurl that provides a comfortable grip, and exercises maximum torque under the worst working conditions without causing operator fatigue.
The design of the fine diamond knurling simplifies grip adjustment of the knob during rapid rotation, thus providing the best control without requiring extreme angular adjustments of the hand and wrist.
Resistant to solvents, oils, grease and other chemical agents.
Specification
Knob body
Plastic
Technopolymer (Polypropylene PP)
Reinforced, shock-resistant
Temperature resistant up to 194 °F (90 °C)
Black, RAL 9005, matte finishSW
Insert
Brass
Color of the cover cap Orange, RAL 2004, matte finishDOR Gray, RAL 7035, matte finishDGR Yellow, RAL 1021, matte finishDGB Blue, RAL 5024, matte finishDBL Red, RAL 3000, matte finishDRT Green, RAL 6017, matte finishDGN
Knobs with **inch*plain blind bore come complete with socket set screw for securing knob to shaft
Length l
Handwheels DIN 950 / GN 949 up
to Ø 250 mm
6
7
2.5
M 3
4.5
-
8
9
3
M 5
5.5
4.5
10
11
3
M 5
5.5
4.5
12
13
4
M 6
6.5
5.5
14
15
4
M 6
6.5
5.5
16
17
5
M 6
8
7
18
19
5
M 6
8
7
20
21
5
M 6
8
7
22
23
6
M 6
10
9
24
25
6
M 6
10
9
26
27
6
M 6
10
9
Filter combination produces no result.
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.
To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.
To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.040 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351