Pneumatic Toggle Clamps GN 860

Type: AP - U-bar version, with two flanged washers

More Information to Toggle Clamps (Pneumatic) Operating instruction GN 860

Product description

The clamping principle of pneumatic toggle clamps GN 860 is identical in construction and dimensions to the manually operated vertical acting toggle clamps GN 810.

To ensure an extended life of the mechanical parts as well as the air cylinders, the operating pressure should not exceed 6 bar and a compressed air maintenance unit should be installed upstream.

Toggle clamps GN 860 have a permanent magnet integrated into the piston. In conjunction with sensors GN 3380, it is possible to detect the piston position, which can deliver a signal, for instance to a machine controller.

Specification

Parts in sheet metal
Case hardening steel C10
Zinc plated, blue passivated finish

Hardened bearing pins

Case-hardened bearing rivets

Case-hardened air cylinder bearing pins

Double-action air cylinder
Max. operating pressure 6 bar

All moving parts lubricated with special grease

Spindle assembly GN 708.1, Type A
- Steel, zinc plated, blue passivated finish
- Rubber thrust pad 85 Shore A

RoHS

Accessory

GN 801 Clamp Mounts
GN 3380 Sensor

Your Contact

You are looking for a Winco partner near you?

Part Number AP - U-bar version, with two flanged washers	Part Number CP - U-bar version, with two flanged washers and spindle assembly GN 708.1	Part Number EP - Solid bar version, with weldable clasp	Size	F_H in N Holding capacity	F_S in N Clamping force at 6 bar ≈	a ≈	b₁	b₂	d₁	d₂	d₃ Compressed air connections	Inside Ø Connection tube	h₁ ≈	h₂	h₃	h₄	h₅


860-75-AP-M			75	157 lbf (700 N)	85.43 lbf (380 N)	0.79	1.57	0.20	M 5	0.18	M 5	0.16	2.13	0.87	0.43	-	-
	860-75-CP-M		75	157 lbf (700 N)	85.43 lbf (380 N)	0.79	1.57	0.20	M 5	0.18	M 5	0.16	2.13	0.87	0.43	0.75	0.29
		860-75-EP-M	75	157 lbf (700 N)	85.43 lbf (380 N)	-	1.57	-	M 5	0.18	M 5	0.16	2.13	0.87	0.43	-	-
860-130-AP-M			130	360 lbf (1600 N)	180 lbf (800 N)	1.10	1.87	0.24	M 6	0.22	G 1/8	0.16	2.60	1.18	0.63	-	-
	860-130-CP-M		130	360 lbf (1600 N)	180 lbf (800 N)	1.10	1.87	0.24	M 6	0.22	G 1/8	0.16	2.60	1.18	0.63	1.00	0.53
		860-130-EP-M	130	360 lbf (1600 N)	180 lbf (800 N)	-	1.87	-	M 6	0.22	G 1/8	0.16	2.60	1.18	0.63	-	-
860-230-AP-M			230	495 lbf (2200 N)	270 lbf (1200 N)	1.57	2.05	0.32	M 8	0.26	G 1/8	0.16	3.07	1.42	0.71	-	-
	860-230-CP-M		230	495 lbf (2200 N)	270 lbf (1200 N)	1.57	2.05	0.32	M 8	0.26	G 1/8	0.16	3.07	1.42	0.71	1.18	0.49
		860-230-EP-M	230	495 lbf (2200 N)	270 lbf (1200 N)	-	2.05	-	M 8	0.26	G 1/8	0.16	3.07	1.42	0.71	-	-
860-330-AP-M			330	562 lbf (2500 N)	393 lbf (1750 N)	1.77	2.91	0.41	M 10	0.34	G 1/4	0.24	3.78	1.81	0.87	-	-
	860-330-CP-M		330	562 lbf (2500 N)	393 lbf (1750 N)	1.77	2.91	0.41	M 10	0.34	G 1/4	0.24	3.78	1.81	0.87	1.46	0.71
		860-330-EP-M	330	562 lbf (2500 N)	393 lbf (1750 N)	-	2.91	-	M 10	0.34	G 1/4	0.24	3.78	1.81	0.87	-	-
860-430-AP-M			430	899 lbf (4000 N)	719 lbf (3200 N)	1.89	2.87	0.49	M 12	0.33	G 1/4	0.31	4.53	2.17	1.02	-	-
	860-430-CP-M		430	899 lbf (4000 N)	719 lbf (3200 N)	1.89	2.87	0.49	M 12	0.33	G 1/4	0.31	4.53	2.17	1.02	1.69	0.89
		860-430-EP-M	430	899 lbf (4000 N)	719 lbf (3200 N)	-	2.87	-	M 12	0.33	G 1/4	0.31	4.53	2.17	1.02	-	-

Size	l₁ ≈ Type AP Type CP	Type EP	l₂ ≈	l₃ ≈	l₄ ≈ max.	l₅	m₁	m₂	m₃	m₄	m₅	m₆	r ≈ Type AP Type CP	Type EP	s₁	s₂	w Adjustable range

75	6.40	-	1.57	1.26	-	-	0.94	0.28	0.57	0.94	0.26	0.65	2.46	-	0.16	-	-
75	6.40	-	1.57	1.26	-	1.77	0.94	0.28	0.57	0.94	0.26	0.65	2.46	-	0.16	-	0.59
75	-	6.42	1.57	-	1.65	-	0.94	0.28	0.57	0.94	0.26	0.65	-	2.48	0.16	0.16	-
130	7.68	-	1.77	1.65	-	-	1.06	0.44	0.49	1.14	0.31	0.75	3.11	-	0.20	-	-
130	7.68	-	1.77	1.65	-	2.17	1.06	0.44	0.49	1.14	0.31	0.75	3.11	-	0.20	-	0.69
130	-	7.72	1.77	-	2.13	-	1.06	0.44	0.49	1.14	0.31	0.75	-	3.15	0.20	0.20	-
230	10.20	-	2.17	2.26	-	-	1.26	0.47	0.73	1.26	0.45	0.81	4.09	-	0.24	-	-
230	10.20	-	2.17	2.26	-	2.68	1.26	0.47	0.73	1.26	0.45	0.81	4.09	-	0.24	-	0.79
230	-	10.24	2.17	-	2.95	-	1.26	0.47	0.73	1.26	0.45	0.81	-	4.13	0.24	0.24	-
330	12.13	-	2.52	2.64	-	-	1.81	0.41	1.14	1.77	0.35	1.26	4.76	-	0.28	-	-
330	12.13	-	2.52	2.64	-	3.03	1.81	0.41	1.14	1.77	0.35	1.26	4.76	-	0.28	-	0.75
330	-	12.20	2.52	-	3.35	-	1.81	0.41	1.14	1.77	0.35	1.26	-	4.84	0.28	0.28	-
430	14.33	-	3.07	2.87	-	-	1.77	0.55	1.26	1.77	0.55	1.26	5.51	-	0.31	-	-
430	14.33	-	3.07	2.87	-	3.94	1.77	0.55	1.26	1.77	0.55	1.26	5.51	-	0.31	-	1.30
430	-	14.37	3.07	-	3.86	-	1.77	0.55	1.26	1.77	0.55	1.26	-	5.55	0.31	0.39	-

Size	F_H in N Holding capacity	F_S in N Clamping force at 6 bar ≈	a ≈	b₁	b₂	d₁	d₂	d₃ Compressed air connections	Inside Ø Connection tube	h₁ ≈	h₂	h₃	h₄	h₅

75	157 lbf (700 N)	85.43 lbf (380 N)	0.79	1.57	0.20	M 5	0.18	M 5	0.16	2.13	0.87	0.43	0.75	0.29
130	360 lbf (1600 N)	180 lbf (800 N)	1.10	1.87	0.24	M 6	0.22	G 1/8	0.16	2.60	1.18	0.63	1.00	0.53
230	495 lbf (2200 N)	270 lbf (1200 N)	1.57	2.05	0.32	M 8	0.26	G 1/8	0.16	3.07	1.42	0.71	1.18	0.49
330	562 lbf (2500 N)	393 lbf (1750 N)	1.77	2.91	0.41	M 10	0.34	G 1/4	0.24	3.78	1.81	0.87	1.46	0.71
430	899 lbf (4000 N)	719 lbf (3200 N)	1.89	2.87	0.49	M 12	0.33	G 1/4	0.31	4.53	2.17	1.02	1.69	0.89

Size	l₁ ≈ Type AP Type CP	Type EP	l₂ ≈	l₃ ≈	l₄ ≈ max.	l₅	m₁	m₂	m₃	m₄	m₅	m₆	r ≈ Type AP Type CP	Type EP	s₁	s₂	w Adjustable range

75	6.40	6.42	1.57	1.26	1.65	1.77	0.94	0.28	0.57	0.94	0.26	0.65	2.46	2.48	0.16	0.16	0.59
130	7.68	7.72	1.77	1.65	2.13	2.17	1.06	0.44	0.49	1.14	0.31	0.75	3.11	3.15	0.20	0.20	0.69
230	10.20	10.24	2.17	2.26	2.95	2.68	1.26	0.47	0.73	1.26	0.45	0.81	4.09	4.13	0.24	0.24	0.79
330	12.13	12.20	2.52	2.64	3.35	3.03	1.81	0.41	1.14	1.77	0.35	1.26	4.76	4.84	0.28	0.28	0.75
430	14.33	14.37	3.07	2.87	3.86	3.94	1.77	0.55	1.26	1.77	0.55	1.26	5.51	5.55	0.31	0.39	1.30

Min	Max	Price
1	9	US$182.80
10	24	US$167.57
25	49	US$152.34
≥ 50		US$137.10

Please select the country.

Select State

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

1-800-877-8351 sales@jwwinco.com

Request Callback

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

JW Winco News

GN 860 Pneumatic Toggle Clamps Steel, with Horizontal Mounting Base

Product description

Specification

Accessory

Part Options / Table

Type

Coding

Metric

Build & Price

Security Information

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 861

GN 810

GN 3380

GN 903

GN 802

GN 708.1

GN 807

Your Contact

JW Winco Services

AP	U-bar version, with two flanged washers
CP	U-bar version, with two flanged washers and spindle assembly GN 708.1
EP	Solid bar version, with weldable clasp