Vertical acting toggle clamps GN 812.1 work according to the toggle principle. Lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position. The two mounting surfaces oriented at 90° to each other allow for space-saving installation next to the clamping point.
Vertical acting toggle clamps with forked clamping arm of type AVF can accommodate an application-specific screw via the flanged washers. A spindle assembly with rubber thrust pad is also included with type CVF.
Vertical acting toggle clamps in type EVF can be adapted to special requirements by welding with the supplied clasp.
Specification
Tensioning mechanism
Steel
Sheet metal parts
Case hardening steel C10, zinc plated, blue passivated finish
Zinc plated, blue passivated finish
Tempered bearing pins
Bearing rivets case-hardened
All moving parts lubricated with a special grease
Handle
Plastic
Red, oil resistant
Clasp for type EVF
Steel, zinc plated, blue passivated finish
Flanged washers GN 898 for type AVF / CVF
Steel
Zinc plated, blue passivated finish
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.286 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
