GN 724.5 Indexing Plungers Steel / Stainless Steel, with Chamfered Pin, with Mounting Flange

Photo

GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish
Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish
GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C2 - Chamfer, bottom
Material / Finish: SW - Black, RAL 9005, textured finish GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C3 - Chamfer, right
Material / Finish: ZB - Zinc plated, blue passivated finish GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange Type: C4 - Chamfer, left
Material / Finish: NI - Stainless steel precision casting
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

Indexing plungers GN 724.5 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The plunger pin engages automatically in the direction of the latching surface.

The latching can be released by pulling the pull ring by hand or with a cable or pull rod using a hook. The types with lock-out are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the plunger pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.

There are several options for fastening. The hex mounting holes allow the use of socket cap screws DIN 912 and hex head screws or nuts according to DIN 931 or DIN 934.

Specification

Guide
Steel precision casting

  • Zinc plated, blue passivated finishZBZB
  • Zinc plated and powder coated
    Black, RAL 9005, textured finishSWSW
    Stainless steel precision castingNI AISI CF-8

Pull ring
Steel precision casting
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel precision casting AISI CF-8 (for NI)


Plunger pin
Steel, hardened
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel AISI 431, hardened (for NI)


Compression spring
Stainless steel AISI 316Ti


RoHS

Technical drawing

Hide technical drawing
GN 724.5 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange sketch

Part Options / Table

Type

C1Chamfer, top
C2Chamfer, bottom
C3Chamfer, right
C4Chamfer, left
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
bsad1d2d3 +0.008h1h2l1l2l3l4l5l6mA/FSpring load ≈
Initial

End
0.510.790.261.340.240.2400.300.062.680.391.380.041.631.891.340.393.15 lbf (14 N)7.87 lbf (35 N)
0.791.180.391.890.350.3980.590.204.020.592.130.062.363.152.170.674.95 lbf (22 N)15.74 lbf (70 N)

Build & Price

Pin diameter b
Square s
Type




Material / Finish
SW
ZB

Selected Part

Total US Dollars (net)
$24.79
Call / Email for Delivery Time
Please note our quantity discounts (US Dollars).
MinMaxPrice
124$24.79
2549$22.72
5099$20.66
≥ 100$18.59
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.380 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD data

2D or 3D CAD files are not available to download at this time.

Please enter your e-mail address below and the files will be sent to you.


CAD Download Tutorial
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 724.5-13-20-C1-ZBGN 724.5-13-20-C1-SWGN 724.5-13-20-C1-NIGN 724.5-13-20-C2-ZBGN 724.5-13-20-C2-SWGN 724.5-13-20-C2-NIGN 724.5-13-20-C3-ZBGN 724.5-13-20-C3-SWGN 724.5-13-20-C3-NIGN 724.5-13-20-C4-ZBGN 724.5-13-20-C4-SWGN 724.5-13-20-C4-NIGN 724.5-20-30-C1-ZBGN 724.5-20-30-C1-SWGN 724.5-20-30-C1-NIGN 724.5-20-30-C2-ZBGN 724.5-20-30-C2-SWGN 724.5-20-30-C2-NIGN 724.5-20-30-C3-ZBGN 724.5-20-30-C3-SWGN 724.5-20-30-C3-NIGN 724.5-20-30-C4-ZBGN 724.5-20-30-C4-SWGN 724.5-20-30-C4-NI
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.