You are here: Product Overview > 3.1 Indexing, Locking, Blocking with Pins and Ball-Shaped Elements > Ball Lock Pins, Rapid Release Pins > GN 113.4 Heavy Duty Ball Lock Pins previous product next product

GN 113.4 Heavy Duty Ball Lock Pins Stainless Steel AISI 630, with Finger Recess

Photo

GN 113.4 Stainless Steel AISI 630 Heavy Duty Ball Lock Pins, with Finger Recess

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 113.4 Print This Page List of Lock Pin Types Load Rating Information ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Information

Heavy duty ball lock pins GN 113.4 are used for rapid connecting and securing of components or workpieces. They are useful and renowned for their compact design. A typical application is locating pins that have to regularly be moved in and out of position.

These ball lock pins have a high load capacity, due to the pin being made of heavy duty, hardened and highly abrasion-resistant stainless steel.

By depressing the spring loaded push button, the two balls are freed, and by releasing the push button the balls are locked.

The loss protection eye ring is enclosed unmounted.

The technical section contains the load ratings for the double shear strength (breaking strength).

Specification

Shank pin
Stainless steel AISI 630
Precipitation hardened

Balls
Stainless steel AISI 420C

Spring
Stainless steel AISI 631

Eye ring
Stainless steel AISI 301

Operating temperature
up to 480 °F (250 °C)

RoHS

Accessory

Holding Bushings GN 1140
Ball Chains GN 111
Ball Chains GN 111.5
Retaining Cables GN 111.2 (with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab)
Retaining Cables GN 111.2 (with Mounting Tabs or Loops)
Spiral Retaining Cables GN 111.4
Press-Fit Drill Bushings DIN 172 (with Flange)
Press-Fit Drill Bushings DIN 179 (without Flange)

Technical drawing

GN 113.4 Stainless Steel AISI 630 Heavy Duty Ball Lock Pins, with Finger Recess sketch

Hide technical drawing

Part Options / Table

Location
bore H11: 0.197

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

5W10P89	0.197 -0.002/-0.003	0.394 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197
5W15P89	0.197 -0.002/-0.003	0.591 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
5W20P89	0.197 -0.002/-0.003	0.787 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
5W25P89	0.197 -0.002/-0.003	0.984 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
5W30P89	0.197 -0.002/-0.003	1.181 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-35	0.197 -0.002/-0.003	1.378 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-40	0.197 -0.002/-0.003	1.575 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-45	0.197 -0.002/-0.003	1.772 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-50	0.197 -0.002/-0.003	1.969 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-60	0.197 -0.002/-0.003	2.362 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-70	0.197 -0.002/-0.003	2.756 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11
113.4-5-80	0.197 -0.002/-0.003	3.150 +0.024	0.22	0.39	0.24 ±0.04	0.866 +0.008	0.197 H11

Location
bore H11: 0.236

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

6W10P89	0.236 -0.002/-0.003	0.394 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236
6W15P89	0.236 -0.002/-0.003	0.591 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W20P89	0.236 -0.002/-0.003	0.787 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W25P89	0.236 -0.002/-0.003	0.984 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W30P89	0.236 -0.002/-0.003	1.181 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W35P89	0.236 -0.002/-0.003	1.378 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W40P89	0.236 -0.002/-0.003	1.575 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W45P89	0.236 -0.002/-0.003	1.772 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
6W50P89	0.236 -0.002/-0.003	1.969 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
113.4-6-60	0.236 -0.002/-0.003	2.362 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
113.4-6-70	0.236 -0.002/-0.003	2.756 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11
113.4-6-80	0.236 -0.002/-0.003	3.150 +0.024	0.28	0.39	0.28 ±0.04	0.866 +0.008	0.236 H11

Location
bore H11: 0.315

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

113.4-8-10	0.315 -0.002/-0.003	0.394 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315
113.4-8-15	0.315 -0.002/-0.003	0.591 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W20P89	0.315 -0.002/-0.003	0.787 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W25P89	0.315 -0.002/-0.003	0.984 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W30P89	0.315 -0.002/-0.003	1.181 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W35P89	0.315 -0.002/-0.003	1.378 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W40P89	0.315 -0.002/-0.003	1.575 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W45P89	0.315 -0.002/-0.003	1.772 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
8W50P89	0.315 -0.002/-0.003	1.969 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
113.4-8-60	0.315 -0.002/-0.003	2.362 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
113.4-8-70	0.315 -0.002/-0.003	2.756 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
113.4-8-80	0.315 -0.002/-0.003	3.150 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
113.4-8-90	0.315 -0.002/-0.003	3.543 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11
113.4-8-100	0.315 -0.002/-0.003	3.937 +0.024	0.37	0.55	0.32 ±0.04	1.063 +0.008	0.315 H11

Location
bore H11: 0.394

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

113.4-10-15	0.394 -0.002/-0.003	0.591 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394
10W20P89	0.394 -0.002/-0.003	0.787 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W25P89	0.394 -0.002/-0.003	0.984 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W30P89	0.394 -0.002/-0.003	1.181 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W35P89	0.394 -0.002/-0.003	1.378 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W40P89	0.394 -0.002/-0.003	1.575 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W45P89	0.394 -0.002/-0.003	1.772 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W50P89	0.394 -0.002/-0.003	1.969 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
10W60P89	0.394 -0.002/-0.003	2.362 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-70	0.394 -0.002/-0.003	2.756 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-80	0.394 -0.002/-0.003	3.150 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-90	0.394 -0.002/-0.003	3.543 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-100	0.394 -0.002/-0.003	3.937 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-110	0.394 -0.002/-0.003	4.331 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11
113.4-10-120	0.394 -0.002/-0.003	4.724 +0.024	0.47	0.55	0.38 ±0.04	1.063 +0.008	0.394 H11

Location
bore H11: 0.472

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

113.4-12-20	0.472 -0.002/-0.003	0.787 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472
12W25P89	0.472 -0.002/-0.003	0.984 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W30P89	0.472 -0.002/-0.003	1.181 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W35P89	0.472 -0.002/-0.003	1.378 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W40P89	0.472 -0.002/-0.003	1.575 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W45P89	0.472 -0.002/-0.003	1.772 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W50P89	0.472 -0.002/-0.003	1.969 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W60P89	0.472 -0.002/-0.003	2.362 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W70P89	0.472 -0.002/-0.003	2.756 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
12W80P89	0.472 -0.002/-0.003	3.150 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
113.4-12-90	0.472 -0.002/-0.003	3.543 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
113.4-12-100	0.472 -0.002/-0.003	3.937 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
113.4-12-110	0.472 -0.002/-0.003	4.331 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11
113.4-12-120	0.472 -0.002/-0.003	4.724 +0.024	0.57	0.79	0.42 ±0.04	1.260 +0.008	0.472 H11

Location
bore H11: 0.630

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

16W30P89	0.630 -0.002/-0.003	1.181 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630
16W35P89	0.630 -0.002/-0.003	1.378 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W40P89	0.630 -0.002/-0.003	1.575 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W45P89	0.630 -0.002/-0.003	1.772 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W50P89	0.630 -0.002/-0.003	1.969 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W60P89	0.630 -0.002/-0.003	2.362 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W70P89	0.630 -0.002/-0.003	2.756 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
16W80P89	0.630 -0.002/-0.003	3.150 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-90	0.630 -0.002/-0.003	3.543 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-100	0.630 -0.002/-0.003	3.937 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-110	0.630 -0.002/-0.003	4.331 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-120	0.630 -0.002/-0.003	4.724 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-130	0.630 -0.002/-0.003	5.118 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-140	0.630 -0.002/-0.003	5.512 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11
113.4-16-150	0.630 -0.002/-0.003	5.906 +0.024	0.75	0.79	0.55 ±0.04	1.260 +0.008	0.630 H11

Location
bore H11: 0.787

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

113.4-20-50	0.787 -0.002/-0.003	1.969 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787
20W60P89	0.787 -0.002/-0.003	2.362 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-70	0.787 -0.002/-0.003	2.756 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
20W80P89	0.787 -0.002/-0.003	3.150 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-90	0.787 -0.002/-0.003	3.543 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
20W100P89	0.787 -0.002/-0.003	3.937 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-110	0.787 -0.002/-0.003	4.331 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
20W120P89	0.787 -0.002/-0.003	4.724 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-130	0.787 -0.002/-0.003	5.118 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-140	0.787 -0.002/-0.003	5.512 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11
113.4-20-150	0.787 -0.002/-0.003	5.906 +0.024	0.98	1.10	0.81 ±0.04	1.535 +0.008	0.787 H11

Location
bore H11: 0.984

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁ -0.002/-0.003	l₁ +0.024	d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

113.4-25-50	0.984 -0.002/-0.003	1.969 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984
113.4-25-60	0.984 -0.002/-0.003	2.362 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-70	0.984 -0.002/-0.003	2.756 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-80	0.984 -0.002/-0.003	3.150 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-90	0.984 -0.002/-0.003	3.543 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-100	0.984 -0.002/-0.003	3.937 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-110	0.984 -0.002/-0.003	4.331 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-120	0.984 -0.002/-0.003	4.724 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-130	0.984 -0.002/-0.003	5.118 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-140	0.984 -0.002/-0.003	5.512 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11
113.4-25-150	0.984 -0.002/-0.003	5.906 +0.024	1.21	1.10	0.87 ±0.04	1.535 +0.008	0.984 H11

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ -0.002/-0.003	l₁ +0.024															d₂	d₃	l₂ ±0.04	l₃ +0.008	Location bore H11

0.197	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	-	-	-	0.22	0.39	0.24	0.866	0.197
0.236	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	-	-	-	0.28	0.39	0.28	0.866	0.236
0.315	0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	-	0.37	0.55	0.32	1.063	0.315
0.394	0.591	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	0.47	0.55	0.38	1.063	0.394
0.472	0.787	0.984	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	-	0.57	0.79	0.42	1.260	0.472
0.630	1.181	1.378	1.575	1.772	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	0.75	0.79	0.55	1.260	0.630
0.787	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	-	-	-	-	0.98	1.10	0.81	1.535	0.787
0.984	1.969	2.362	2.756	3.150	3.543	3.937	4.331	4.724	5.118	5.512	5.906	-	-	-	-	1.21	1.10	0.87	1.535	0.984

Build & Price

3D Product Configurator

Load Capacity of Ball Lock Pins

Information
The load capacities specified in the table for the double shear strength (breaking strength) have been calculated or theoretically determined in accordance with DIN 50141.

The endangered bolt cross-section S was considered in two shear planes until breakage, according to the sketch shown opposite.

The details given on load capacity are non-binding guide values without any liability. In general, they do not constitute a warranty of quality. The user must determine from case to case if a product is suitable for the application. Ambient influences may affect the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F ≈ double shear strength according to DIN 50141 (breaking strength)

Show / Hide columns

d₁ Pin diameter	GN 113.4

5	5395 lbf (24 kN)
6	7868 lbf (35 kN)
8	14163 lbf (63 kN)
10	22481 lbf (100 kN)
12	32372 lbf (144 kN)
16	57776 lbf (257 kN)
20	90598 lbf (403 kN)
25	141854 lbf (631 kN)

Selected Part

Part Number

Total US Dollars (net)

$39.82

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$39.82
100	249	$36.50
250	499	$33.19
≥ 500		$29.87

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.032 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

GN 113.4 Heavy Duty Ball Lock Pins Stainless Steel AISI 630, with Finger Recess

Photo

Product Family Stainless Steel

Product description

Information

Specification

Accessory

Technical drawing

Part Options / Table

Location
bore H11: 0.197

Location
bore H11: 0.236

Location
bore H11: 0.315

Location
bore H11: 0.394

Location
bore H11: 0.472

Location
bore H11: 0.630

Location
bore H11: 0.787

Location
bore H11: 0.984

Metric

Build & Price

Load Capacity of Ball Lock Pins

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 113.4 Heavy Duty Ball Lock Pins Stainless Steel AISI 630, with Finger Recess

Photo

Product Family Stainless Steel

Product description

Information

Specification

Accessory

Technical drawing

Part Options / Table

Location bore H11: 0.197

Location bore H11: 0.236

Location bore H11: 0.315

Location bore H11: 0.394

Location bore H11: 0.472

Location bore H11: 0.630

Location bore H11: 0.787

Location bore H11: 0.984

Metric

Build & Price

Load Capacity of Ball Lock Pins

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Location
bore H11: 0.197

Location
bore H11: 0.236

Location
bore H11: 0.315

Location
bore H11: 0.394

Location
bore H11: 0.472

Location
bore H11: 0.630

Location
bore H11: 0.787

Location
bore H11: 0.984