GN 513 spring loaded positioning elements are universal pressure elements used as detents, positioners or for clamping with spring pressure. The spring loaded nose pin can be used for a push-on or push-off operation. In addition the spring loaded nose pin cannot rotate.
At the retracting end (type I), the tapped thread can accept a threaded rod, an operating knob, or any other mating threaded element to pull back on the pin. The opposite tapped threaded end (Type I) can accept a special type or special length of plunger nose pin.
The spring loaded element can be screwed into a mating thread at the hex of the retracting end or the wrench flats at the opposite end of the plunger.
Steel, zinc plated, blue passivated finish
Standard spring load (Identification no. 1):
circlip phosphated (anthracite)
High spring load (Identification no. 2):
circlip zinc plated, blue passivated finish
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.028 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351