Socket Cap Screws GN 912.2

Photo

GN 912.2 Stainless Steel Socket Cap Screws, with Recessed Stud for Loss Protection

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product description

Information

GN 912.2 socket cap screws can be used to prevent loss of the screw due to the d₃ recessed portion of the stud. Thus the "captivity of the mounting element", according to the Machinery Directive 2006/42/EG, is given.

When using, instead of a typical tapped or bored hole, it is necessary to provide tapped bores with a thread d₁ on each of the two elements to be assembled. Additionally, a clearance bore of d₄ on one or both sides must be cut.

Depending on the design and required clamping length a₁ - a₃ of the component being attached, there are a number of assembly options as shown above.

Specification

Stainless steelNI AISI 304

RoHS

Build & Price

Part Number	d₁ Thread	l₁	a₁ in mm	a₂ in mm	a₃ in mm	d₂	d₃ -0.01	d₄	k	l₂	l₃	A/F in mm

912.2-M3-12-NI	M 3	0.47	1.5-3	3-6.5	6.5-8	0.22	0.09 -0.01	0.14	0.12	0.16	0.06	2.5
912.2-M3-16-NI	M 3	0.63	3-7	7-8	8-12	0.22	0.09 -0.01	0.14	0.12	0.16	0.06	2.5
912.2-M4-16-NI	M 4	0.63	2-5	5-8	8-11	0.28	0.12 -0.01	0.18	0.16	0.20	0.08	3
912.2-M4-20-NI	M 4	0.79	5-9	9-11	11-15	0.28	0.12 -0.01	0.18	0.16	0.20	0.08	3
912.2-M5-20-NI	M 5	0.79	2.5-6	6-10.5	10.5-14	0.33	0.15 -0.01	0.22	0.20	0.24	0.10	4
912.2-M5-25-NI	M 5	0.98	6-11	11-14	14-19	0.33	0.15 -0.01	0.22	0.20	0.24	0.10	4
912.2-M6-25-NI	M 6	0.98	3-7	7-13	13-17	0.39	0.18 -0.01	0.26	0.24	0.31	0.12	5
912.2-M6-30-NI	M 6	1.18	7-12	12-17	17-22	0.39	0.18 -0.01	0.26	0.24	0.31	0.12	5
912.2-M8-30-NI	M 8	1.18	4-8	8-16	16-20	0.51	0.25 -0.01	0.33	0.31	0.39	0.16	6
912.2-M8-35-NI	M 8	1.38	8-13	13-20	20-25	0.51	0.25 -0.01	0.33	0.31	0.39	0.16	6
912.2-M8-40-NI	M 8	1.57	13-18	18-25	25-30	0.51	0.25 -0.01	0.33	0.31	0.39	0.16	6

d₁ Thread	l₁	a₁ in mm	a₂ in mm	a₃ in mm	d₂	d₃ -0.01	d₄	k	l₂	l₃	A/F in mm

M 3	0.47	1.5-3	3-6.5	6.5-8	0.22	0.09	0.14	0.12	0.16	0.06	2.5
M 3	0.63	3-7	7-8	8-12	0.22	0.09	0.14	0.12	0.16	0.06	2.5
M 4	0.63	2-5	5-8	8-11	0.28	0.12	0.18	0.16	0.20	0.08	3
M 4	0.79	5-9	9-11	11-15	0.28	0.12	0.18	0.16	0.20	0.08	3
M 5	0.79	2.5-6	6-10.5	10.5-14	0.33	0.15	0.22	0.20	0.24	0.10	4
M 5	0.98	6-11	11-14	14-19	0.33	0.15	0.22	0.20	0.24	0.10	4
M 6	0.98	3-7	7-13	13-17	0.39	0.18	0.26	0.24	0.31	0.12	5
M 6	1.18	7-12	12-17	17-22	0.39	0.18	0.26	0.24	0.31	0.12	5
M 8	1.18	4-8	8-16	16-20	0.51	0.25	0.33	0.31	0.39	0.16	6
M 8	1.38	8-13	13-20	20-25	0.51	0.25	0.33	0.31	0.39	0.16	6
M 8	1.57	13-18	18-25	25-30	0.51	0.25	0.33	0.31	0.39	0.16	6

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$4.88

In Stock: 51

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	99	$4.88
100	249	$4.48
250	499	$4.07
≥ 500		$3.66

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.002 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.