Fluid Sight Glasses GN 743.7

Product description

Information

The conical thread of GN 743.7 fluid sight glasses makes a metallic seal possible. When tightened, the conical external thread R wedges itself within the corresponding internal thread Rp.

At the reference level “a”, the external thread has the same thread diameter as the internal thread, so that it can be fastened in by hand up to “a”. The tightening with a tool increases the screw-in length and seals the screw connection. In addition, a sealant (fibrous or teflon tape) is usually used. The ”R” thread is “roughened”, so that the sealant does not shift when screwing in.

These fluid sight glasses can also be used on pressurized tanks. Tests regarding maximum pressure are available.

Specification

Body
Brass CuZn40Pb2

Reflector
Plastic
Technopolymer (Polysulfon)

Sight glass
Float glass
Temperature resistant up to 212 °F (100 °C)

O-ring
Rubber NBR (Perbunan^®)

RoHS

On request

EPDM O-rings

Build & Price

Part Number A - With reflector	Part Number B - Without reflector	d₁	d₂ External thread Conical	a Reference level	d₃ at "a"	d₄ Internal thread Cylindrical	Conical	e	l₁	l₂	l₃ Usable thread length	p Thread pitch	s


6CTK0	6CTK5	0.43	R 3/8	0.25	0.66	Rp 3/8	-	0.87	0.51	0.24	0.40	0.05	0.75
6PTK0	6PTK5	0.43	3/8 NPT	0.24	0.67	-	3/8 NPT	0.87	0.59	0.24	-	0.06	0.75
8CTK1	8CTK6	0.55	R 1/2	0.32	0.83	Rp 1/2	-	1.08	0.67	0.28	0.52	0.07	0.94
8PTK1	8PTK6	0.55	1/2 NPT	0.32	0.83	-	1/2 NPT	1.08	0.63	0.28	-	0.07	0.94
11CTK2	11CTK7	0.71	R 3/4	0.37	1.04	Rp 3/4	-	1.22	0.71	0.31	0.57	0.07	1.06
11PTK2	11PTK7	0.71	3/4 NPT	0.34	1.05	-	3/4 NPT	1.30	0.71	0.31	-	0.07	1.13
1CTK3	1CTK8	0.94	R 1	0.41	1.31	Rp 1	-	1.59	0.83	0.35	0.66	0.09	1.42
1PTK3	1PTK8	0.94	1 NPT	0.40	1.33	-	1 NPT	1.63	0.87	0.31	-	0.09	1.37
12CTK4	12CTK9	1.26	R 1 1/4	0.50	1.65	Rp 1 1/4	-	2.09	0.94	0.35	0.75	0.09	1.81
125PTK4	125PTK9	1.26	1 1/4 NPT	0.42	1.66	-	1 1/4 NPT	2.03	0.91	0.35	-	0.09	1.75

d₁	d₂ External thread Conical	a Reference level	d₃ at "a"	d₄ Internal thread Cylindrical	Conical	e	l₁	l₂	l₃ Usable thread length	p Thread pitch	s

0.43	R 3/8	0.25	0.66	Rp 3/8	-	0.87	0.51	0.24	0.40	0.05	0.75
0.43	3/8 NPT	0.24	0.67	-	3/8 NPT	0.87	0.59	0.24	-	0.06	0.75
0.55	R 1/2	0.32	0.83	Rp 1/2	-	1.08	0.67	0.28	0.52	0.07	0.94
0.55	1/2 NPT	0.32	0.83	-	1/2 NPT	1.08	0.63	0.28	-	0.07	0.94
0.71	R 3/4	0.37	1.04	Rp 3/4	-	1.22	0.71	0.31	0.57	0.07	1.06
0.71	3/4 NPT	0.34	1.05	-	3/4 NPT	1.30	0.71	0.31	-	0.07	1.13
0.94	R 1	0.41	1.31	Rp 1	-	1.59	0.83	0.35	0.66	0.09	1.42
0.94	1 NPT	0.40	1.33	-	1 NPT	1.63	0.87	0.31	-	0.09	1.37
1.26	R 1 1/4	0.50	1.65	Rp 1 1/4	-	2.09	0.94	0.35	0.75	0.09	1.81
1.26	1 1/4 NPT	0.42	1.66	-	1 1/4 NPT	2.03	0.91	0.35	-	0.09	1.75

3D Product Configurator

Selected Part

Part Number

Total US Dollars (net)

$14.00

In Stock: 45

In Stock

Quantity

Please note our quantity discounts (US Dollars).

Min	Max	Price
1	49	$14.00
50	99	$12.83
100	249	$11.67
≥ 250		$10.50

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.041 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351

All Prices are in US Dollars. Taxes Not Included.