GN 131.4Two-Way Connector ClampsStainless Steel, Split Assembly
Product Family Stainless Steel
Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.
The clamping bores of the two-way connector clamps GN 131.4 are designed for typical construction tubes. The square sections s1 and s2 also allow bars or tubes with a square cross-section to be clamped.
Clamping at screw point z1 is performed radially on the surface of the profiles used. At the screw location z2, socket cap screws reduce the bore cross-section for clamping. The split clamping point z2 permits subsequent insertion of the clamp connector into an existing structure and facilitates assembly when axial sliding is not possible, e.g., due to tight bending radii.
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.224 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
