GN 145.1 flanged linear actuator connectors are based on flanged connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation “G” are equipped with sleeve bearings.
With the screw location z, the play of the guide bore d1 can be adjusted or the linear actuator connectors can be clamped after adjustment.
For quick clamping without tools, the socket cap screw can be replaced by a GN 911 adjustable lever listed in the table as accessory.
RoHS compliant
| 2 | With stainless steel socket cap screw DIN 912 |
| d1 Bore Without sleeve bearing | With sleeve bearing | d2 | d3 Mounting screws on the drive key | k Clamping length | l1 | l2 | m | t | x | y1 | y2 | z Screw location for screw size | Accessory Recommended lever GN 911 for z l3 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B 18 | G 18 | 0.22 | M 3 | 0.98 | 1.57 | 0.98 | 0.71 | 0.28 | 1.38 | 1.97 | 1.50 | M6-20 | 1.77 | 2.48 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | $41.25 |
| 10 | 24 | $37.81 |
| 25 | 49 | $34.38 |
| ≥ 50 | $30.94 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
