EN 570 Crank Handles Technopolymer Plastic, with Revolving Handle, with Through Bore

Photo

EN 570 Technopolymer Plastic Crank Handles with Revolving Handle, with Through Bore
Elesa original design
code: MT.

Product description

Information

The protruding steel bushing of EN 570 crank handles ensures an accurate bore and square to bore face. It can be retained with a pin or a retaining screw. The link between the crank handle and shaft can be established either with a keyway or a follower pin.

The structure of the crank arm and special technopolymer used, make these EN 570 crank handles very strong and therefore suitable for heavy duty cranking applications.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Crank body
Plastic
Technopolymer (Polyamide PA)
  • Special glass fiber reinforced
  • Temperature resistant up to 195 °F (90 °C)
  • Black, matte finish

Hub bushing
Steel, blackened finish
Threaded bushing to accept the revolving handle
Brass
Revolving handle GN 598
Plastic
Technopolymer
  • Black, matte finish
    Black, shiny finish (only size 14)
  • Threaded spindle
    Steel, zinc plated, blue passivated finish

RoHS compliant

On request

Other modifications such as special inch and metric bores, squares, keyways, set screw holes, etc.

Technical drawing

3D
Hide technical drawing
EN 570 Technopolymer Plastic Crank Handles with Revolving Handle, with Through Bore sketch

Part Options / Table

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)
Length ld1 +0.001
Bore
d2d3d4h1h2h5h6h7h8 ≈Ø
Handle
1.97B 1/4-0.630.510.911.101.220.390.390.431.120.55
2.52B 5/16B 3/80.710.631.061.141.300.390.390.511.670.71
3.15B 3/8-0.870.671.181.261.420.390.510.512.070.83
3.94B 1/2-0.940.831.341.461.570.390.590.632.660.91
5.12B 9/16-1.100.981.571.731.930.550.790.633.251.02
6.30B 5/8-1.341.061.771.932.170.590.910.713.641.10
8.27B 5/8-1.571.221.972.092.360.591.020.793.641.10
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
Length ld1 +0.001
Bore
d2d3d4h1h2h5h6h7h8 ≈Ø
Handle
1.97B 6-0.630.510.911.101.220.390.390.431.120.55
2.52B 8B 100.710.631.061.141.300.390.390.511.670.71
3.15B 10-0.870.671.181.261.420.390.510.512.070.83
3.94B 12-0.940.831.341.461.570.390.590.632.660.91
5.12B 14-1.100.981.571.731.930.550.790.633.251.02
6.30B 16-1.341.061.771.932.170.590.910.713.641.10
8.27B 16-1.571.221.972.092.360.591.020.793.641.10

Build & Price

3D Product Configurator
Length l
Through Bore d1

Inch


Metric


GN 110 Cross Holes (Special Order) - Metric

GN 110 Zeichnung
Show / Hide columns
d1 / sd1 / sd2 H11d3
Thread
Length l
Standard version
Length l
Handwheels DIN 950 / GN 949 up
to Ø 250 mm
672.5M 34.5-
893M 55.54.5
10113M 55.54.5
12134M 66.55.5
14154M 66.55.5
16175M 687
18195M 687
20215M 687
22236M 6109
24256M 6109
26276M 6109

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-160-B14-A with cross hole GN 110-QE

Cross holes GN 110

GN 110 Cross Holes (Special Order) - Inch

GN 110 Zeichnung
Show / Hide columns
d1 / sd2 +0.003/-0.001d3
Thread
Length l
1/43/326x320.188
5/161/810x320.2
3/81/810x320.2
1/25/321/4x200.25
9/165/321/4x200.25
5/83/161/4x200.312
11/163/161/4x200.312
3/43/161/4x200.312
13/161/41/4x200.375
11/45/16x180.375
1 1/161/45/16x180.375
1 1/181/45/16x180.375
1 1/141/45/16x180.375

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

The cross hole GN 110 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Handwheel DIN 950-GG-100-B1/2-A with cross hole GN 110-QE

How to order GN 110 Inch

Selected Part

Total US Dollars (net)
$19.46
In Stock: 3
In Stock
Please note our quantity discounts (US Dollars).
MinMaxPrice
16$19.46
799$18.75
100249$17.69
≥ 250$15.92
Prop 65: -
Please contact our Sales Department for more information.
RoHS: -
No details on RoHS compatibility are available at this time. Please contact our Sales Department for more information.
Weight: 0.141 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

EN 570-50-B6EN 570-64-B8EN 570-64-B10EN 570-80-B10EN 570-100-B12EN 570-130-B14EN 570-160-B16EN 570-210-B16EN 570-50-B1/4EN 570-64-B5/16EN 570-64-B3/8EN 570-80-B3/8EN 570-100-B1/2EN 570-130-B9/16EN 570-160-B5/8EN 570-210-B5/8

This could also be interesting...

Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.