ELESA original design 
The reticular structure of the crank arm and special technopolymer of EN 670 crank handles used make this handle very strong and therefore, suitable for transmitting high torque values.
Design of handle provides fingers with a safe and ergonomic grip, preventing them from slipping off; semi-spherical end cap fits comfortably in the palm of the hand.
Resistant to solvents, oils, grease and other chemical agents.
Cover caps are supplied but not assembled, press-fit, removable with screwdriver.
RoHS compliant
| Length l | d1 +0.001 Bore | s +0.002 Square | d2 | d3 | d4 | h1 | h2 | h3 | h4 | h5 | h6 ≈ | Ø Handle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.94 | B 1/2 | V 1/2 | 0.94 | 0.93 | 1.18 | 1.30 | 2.07 | 0.39 | 0.67 | 0.63 | 2.56 | 0.87 |
| 4.92 | B 5/8 | V 5/8 | 1.10 | 1.04 | 1.38 | 1.57 | 2.44 | 0.55 | 0.71 | 0.73 | 3.15 | 0.94 |
| Length l | d1 +0.001 Bore | s +0.002 Square | d2 | d3 | d4 | h1 | h2 | h3 | h4 | h5 | h6 ≈ | Ø Handle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.94 | B 12 | V 12 | 0.94 | 0.93 | 1.18 | 1.30 | 2.07 | 0.39 | 0.67 | 0.63 | 2.56 | 0.87 |
| 4.92 | B 14 | V 14 | 1.10 | 1.04 | 1.38 | 1.57 | 2.44 | 0.55 | 0.71 | 0.73 | 3.15 | 0.94 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 6 | $25.69 |
| 7 | 99 | $24.75 |
| 100 | 249 | $23.35 |
| ≥ 250 | $21.02 |
Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351
