GN 962 heavy duty pneumatic toggle clamps are equipped with a reinforced body, and bearing pins and bushings are hardened and ground. This makes them suitable for applications in which substantial forces arise and a long service life is required.
To ensure an extended life of the mechanical parts as well as the pneumatic cylinder, the operating pressure should not exceed 6 bar. In addition, a compressed-air control unit should be mounted in the air intake line.
GN 962 heavy duty pneumatic toggle clamps are equipped with a magnetic piston as standard. This makes end position detection possible in connection with GN 3380 sensors.
Specification
Toggle clamp
Steel, phosphate-treated
Bearing pins / bushings
Steel, hardened and ground
Double-action air cylinder,
with adjustable end position damping
Max. pressure 6 bar
Spindle assembly GN 708.1,
Type A
Steel, zinc plated, blue passivated finish
Rubber tip 85 shore A
All moving parts lubricated with special grease
RoHS
Accessory
GN 3380 Sensor
Technical drawing
Hide technical drawing
Part Options / Table
Type
APV
Clamping arm with slotted hole, with two flanged washers
CPV
Clamping arm with slotted hole, with two flanged washers and GN 708.1 spindle assembly
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 2.187 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351