Indexing Plunger Latch Mechanisms GN 416

Type: L1 - Latching / lock-out via counter-clockwise rotation

Product Family Accessories for profile systems

Normelemente dieser Produktfamilie sind kompatibel mit Aluprofilen des i- und b-Baukastens, sowie mit den gängigsten Aluminium-Profilsystemen anderer Hersteller. Über Nutensteine bzw. Hammerkopfschrauben oder -muttern lassen sich die Ganter-Normelemente einfach in der Nut der Profile montieren.

Alle kompatiblen Produkte anzeigen

List of Indexing Plunger Types List of Indexing Plunger Types Load Rating Information Plastic Characteristics Stainless Steel Characteristics

Product description

Indexing plunger latch mechanisms GN 416 are operated by an axial pulling of the latch lever. This kind of operation from the top side is advantageous in certain installation situations.

The plunger pins of type S are engaged in the housing to prevent rotation, and therefore lock in the starting position but not the retracted position. Types R1 and L1 offer a locking function in the starting as well as in the retracted position, preventing unintentional operation. A lock notch holds the latch lever in both positions.

The fastening range is designed so that washers ISO 7092 can be used.

In addition to using metric fasteners for mounting:

where b₄ = 5.4 mm, #10-32 socket cap screws can be used
where b₄ = 6.4 mm, #1/4-20 socket cap screws can be used

Specification

Guide
Zinc die-cast
Powder coated
Black, RAL 9005, textured finish

Plunger pin
Steel, zinc plated, blue passivated finish

Spring
Stainless steel AISI 301

Latch lever
Plastic, Polyamide (PA)
- Black, matte finish
- Not removable

RoHS

Accessory

GN 416.1 Locators
GN 412.2 Locating Bushings

Your Contact

You are looking for a Winco partner near you?

Part Number S - Without latching, non lock-out	Part Number L1 - Latching / lock-out via counter-clockwise rotation	Part Number R1 - Latching / lock-out via clockwise rotation	d Pin -0.002 Bore +0.004/+0.002	b₁	b₂	b₃	b₄	h₁	h₂	k₁	k₂	k₃	k₄	l₁	l₂ min.	l₃	Spring load ≈ Initial	End


416-6-38-S	416-6-38-L1	416-6-38-R1	0.236 -0.002 / +0.004/+0.002	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
416-8-38-S	416-8-38-L1	416-8-38-R1	0.315 -0.002 / +0.004/+0.002	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
416-8-46-S	416-8-46-L1	416-8-46-R1	0.315 -0.002 / +0.004/+0.002	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)
416-10-38-S	416-10-38-L1	416-10-38-R1	0.394 -0.002 / +0.004/+0.002	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
416-10-46-S	416-10-46-L1	416-10-46-R1	0.394 -0.002 / +0.004/+0.002	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)
416-12-46-S	416-12-46-L1	416-12-46-R1	0.472 -0.002 / +0.004/+0.002	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)

d Pin -0.002 Bore +0.004/+0.002	b₁	b₂	b₃	b₄	h₁	h₂	k₁	k₂	k₃	k₄	l₁	l₂ min.	l₃	Spring load ≈ Initial	End

0.236	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
0.315	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
0.315	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)
0.394	1.50	1.26	0.63	0.21	0.33	0.24	1.06	0.22	0.47	0.57	1.85	0.39	0.55	1.57 lbf (7 N)	3.82 lbf (17 N)
0.394	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)
0.472	1.81	1.57	0.79	0.25	0.43	0.24	1.30	0.26	0.57	0.75	2.32	0.47	0.67	1.80 lbf (8 N)	5.17 lbf (23 N)