Breather filters GN 884 are used when an air exchange is to be enabled between a closed interior and the outside. This effectively prevents underpressure or overpressure occurring in the system.
The stainless steel wire mesh prevents airborne particles above a certain size from entering the interior from the outside and, at the same time, ensures that fluid particles do not escape to the outside.
A symbol “BE” (type A) or a blue colored ring (type B) mark the filter function. The recommended installation position is vertically upwards.
Assembly note:
For wall thicknesses below 4 mm, use thin hex nuts GN 7430.
Specification
Body BrassMS
Air filter
Stainless steel wire mesh AISI 304
Filter class G2-G3
Mean separation efficiency
(Am approx. 65-85 %,
based on a particle size > 10 μm)
Seal DIN 7603 A
Soft iron 1.0338
(at d1 = M10x1: PA6)
Breather cap (Type B)
Stainless steel AISI 304
Temperature resistant from
-22 °F to +392 °F (-30 °C to +200 °C)
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.016 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: 800-877-8351
Beginning April 14, 2025, we will implement a price adjustment. Some items will have a price decrease, while others will increase. The adjustment helps ensure our commitment to providing our customers with the best products and services.
We will honor current published prices through April 13, 2025.
Customers with pricing agreements will not be effected until annual pricing is reviewed.
An error has occurred!
We have received your callback request and will contact you soon.