EN 650 Fluid Level Indicators Plastic, Steel Screws

Photo

EN 650 Plastic Fluid Level Indicators, Steel Screws Type: B - With thermometer
ELESA original design
code: HCX.
Type: B - With thermometer
EN 650 Plastic Fluid Level Indicators, Steel Screws Type: B - With thermometer EN 650 Plastic Fluid Level Indicators, Steel Screws Type: A - Without thermometer

Product description

Information

A special feature of fluid level indicators EN 650 is that the fluid level is visible even from the side.

The polyamide body consists of two parts, which are ultrasonically welded together. The fluid level indicators are individually tested for leakage at 3 bar air pressure.

These fluid level indicators can also be used on pressurized tanks. Tests regarding maximum pressure are available.

The reflector is a white lacquered aluminum plate with black marking lines or temperature scale. The scale is located outside of the fluid, thus it is specially protected.

The design of the fluid level indicators offers a magnifying effect that makes the scale easily legible.

Specification

Body
Plastic
Crystal clear Polyamide PA-T

  • Aging resistant
  • High mechanical strength
  • Temperature resistant up to 194 °F (90 °C)
  • Solvent resistant, but not alcohol resistant
  • Avoid contact with hot water

Reflector
Aluminum

  • White lacquered finish
  • With two black marking lines / scale

O-rings
Rubber NBR (Perbunan®)


Set screw / hex nut / serrated lock washer
Steel, zinc plated, blue passivated finish


RoHS

On request

Fluid level indicators EN 650 (AR),
suitable for alcohol

Technical drawing

3D
Hide technical drawing
EN 650 Plastic Fluid Level Indicators, Steel Screws sketch

Part Options / Table

Type

AWithout thermometer
BWith thermometer
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
l1d
Thread
bl2l3l4l5l6l7s ≈
Max. wall thickness
Thermometer scale
°C

°F
2.99M 101.060.831.574.170.710.590.630.4720 ... 10068 ... 210
5.00M 121.220.913.156.340.910.670.670.470 ... 10032 ... 210
10.00M 121.380.837.9911.421.020.710.710.470 ... 10032 ... 210

Build & Price

3D Product Configurator
Length l1
Thread d
Type


Assembly Instruction

Drawing mounting information GN 650

The assembly of EN 650 fluid level indicators is very easy and economical. It is sufficient to drill two holes of Ø 10.5 or Ø 12.5 mm at distance l1 in the container wall. The fluid level indicator can also be mounted directly, i.e. without nut, if the container wall is provided with the corresponding thread.
All component parts necessary for the assembly are included: set screws with drilling for the fluid flow, hexagon nuts, O-rings, and serrated lock washers for securing. For a perfect seal, the screws should not be overtightened (max. 12 Nm). Recommended roughness of the sealing surface, Ra = 3 μm.

Selected Part

Total US Dollars (net)
$36.01
In Stock: 2
In Stock
Please note our quantity discounts (US Dollars).
MinMaxPrice
16$36.01
799$34.70
100249$32.74
≥ 250$29.47
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.182 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 800-877-8351
All Prices are in US Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time: 800-877-8351

Special Requests | Contact our sales team

EN 650-76-M10-AEN 650-76-M10-BEN 650-127-M12-AEN 650-127-M12-BEN 650-254-M12-AEN 650-254-M12-B

This could also be interesting...

Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 7:30 AM and 5:00 PM Central Time

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.